This is the latest recevied telemetry packets stored in our database for station/object VA7GFZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Temp* | Rx1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1770183820 | 25.4 Volt | 4.5 C | 70 Pkt | 740 Pcnt | 0 None |
| 1770181060 | 25.4 Volt | 5 C | 70 Pkt | 740 Pcnt | 0 None |
| 1770178300 | 25.4 Volt | 5 C | 60 Pkt | 740 Pcnt | 0 None |
| 1770175540 | 25.4 Volt | 5 C | 60 Pkt | 740 Pcnt | 0 None |
| 1770172780 | 25.6 Volt | 5 C | 50 Pkt | 740 Pcnt | 0 None |
| 1770170020 | 25.6 Volt | 5.5 C | 70 Pkt | 740 Pcnt | 0 None |
| 1770167260 | 25.8 Volt | 5 C | 80 Pkt | 740 Pcnt | 0 None |
| 1770158980 | 28 Volt | 4 C | 100 Pkt | 740 Pcnt | 0 None |
| 1770156220 | 28 Volt | 3 C | 90 Pkt | 740 Pcnt | 0 None |
| 1770150703 | 29.2 Volt | 2 C | 90 Pkt | 740 Pcnt | 0 None |
| 1770147941 | 29.2 Volt | 1 C | 80 Pkt | 740 Pcnt | 0 None |
| 1770145181 | 29 Volt | 0.5 C | 90 Pkt | 740 Pcnt | 0 None |
| 1770142424 | 28.4 Volt | 0 C | 100 Pkt | 740 Pcnt | 0 None |
| 1770139664 | 27.6 Volt | 0 C | 70 Pkt | 740 Pcnt | 0 None |
| 1770131381 | 25 Volt | 0 C | 60 Pkt | 740 Pcnt | 0 None |
| 1770128621 | 25 Volt | 0 C | 60 Pkt | 740 Pcnt | 0 None |
| 1770125862 | 25 Volt | 0 C | 100 Pkt | 740 Pcnt | 0 None |
| 1770123101 | 25 Volt | 0 C | 90 Pkt | 740 Pcnt | 0 None |
| 1770120342 | 25 Volt | 0 C | 60 Pkt | 740 Pcnt | 0 None |
| 1770114825 | 25.2 Volt | 0 C | 70 Pkt | 740 Pcnt | 0 None |
| 1770112062 | 25.2 Volt | 0 C | 80 Pkt | 740 Pcnt | 0 None |
| 1770106544 | 25.2 Volt | 0 C | 60 Pkt | 740 Pcnt | 0 None |
| 1770103784 | 25.2 Volt | 0 C | 70 Pkt | 740 Pcnt | 0 None |
| 1770101025 | 25.4 Volt | 0 C | 60 Pkt | 740 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.2, 0
Temp: 0, 0.5, -64
Rx1h: 0, 10, 0
Eff1h: 0, 10, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)