APRS Track Direct

My position About ☰

reset

ON0TVO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0TVO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Rx1h*	Dg1h*	Eff1h*	Eff*
1749315661	15 C	310 Pkt	140 Pkt	61 Pcnt	63 Pcnt
1749315060	15 C	300 Pkt	140 Pkt	60 Pcnt	63 Pcnt
1749314460	15 C	300 Pkt	140 Pkt	62 Pcnt	63 Pcnt
1749313860	14.5 C	280 Pkt	140 Pkt	63 Pcnt	64 Pcnt
1749313265	14.5 C	260 Pkt	130 Pkt	64 Pcnt	64 Pcnt
1749312661	14.5 C	250 Pkt	120 Pkt	63 Pcnt	64 Pcnt
1749312060	15 C	230 Pkt	110 Pkt	63 Pcnt	64 Pcnt
1749311461	15.5 C	210 Pkt	100 Pkt	63 Pcnt	64 Pcnt
1749310860	15.5 C	220 Pkt	110 Pkt	61 Pcnt	64 Pcnt
1749310260	15.5 C	230 Pkt	110 Pkt	61 Pcnt	64 Pcnt
1749309666	17 C	230 Pkt	110 Pkt	61 Pcnt	64 Pcnt
1749309062	17.5 C	260 Pkt	120 Pkt	63 Pcnt	64 Pcnt
1749308461	17 C	290 Pkt	140 Pkt	63 Pcnt	64 Pcnt
1749307861	17 C	300 Pkt	140 Pkt	63 Pcnt	64 Pcnt
1749307261	17 C	300 Pkt	130 Pkt	63 Pcnt	64 Pcnt
1749306661	17 C	280 Pkt	120 Pkt	62 Pcnt	64 Pcnt
1749306066	17.5 C	260 Pkt	120 Pkt	61 Pcnt	64 Pcnt
1749305462	17.5 C	310 Pkt	130 Pkt	61 Pcnt	64 Pcnt
1749304861	17.5 C	300 Pkt	130 Pkt	62 Pcnt	64 Pcnt
1749304261	19 C	300 Pkt	130 Pkt	62 Pcnt	64 Pcnt
1749303661	18.5 C	300 Pkt	130 Pkt	63 Pcnt	64 Pcnt
1749303064	19.5 C	310 Pkt	140 Pkt	65 Pcnt	64 Pcnt
1749302465	19 C	300 Pkt	140 Pkt	66 Pcnt	64 Pcnt
1749301861	19.5 C	280 Pkt	130 Pkt	69 Pcnt	64 Pcnt
1749301261	19 C	310 Pkt	140 Pkt	69 Pcnt	64 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)