This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-TT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CO2* | CPU* | Temp* | Baro* | Load* |
|---|---|---|---|---|---|
| 1750108248 | 450 ppm | 45.2 C | 29 C | 1010.8 hPa | 68.4 % |
| 1750107888 | 440 ppm | 45.2 C | 29 C | 1010.8 hPa | 68.4 % |
| 1750107528 | 440 ppm | 45.2 C | 29 C | 1010.8 hPa | 68 % |
| 1750107171 | 430 ppm | 45.2 C | 29 C | 1010.8 hPa | 68.8 % |
| 1750106808 | 440 ppm | 45.2 C | 29 C | 1010.8 hPa | 68.4 % |
| 1750106448 | 440 ppm | 45.2 C | 29.5 C | 1010.8 hPa | 68.4 % |
| 1750106088 | 440 ppm | 45.2 C | 29.5 C | 1010.8 hPa | 68 % |
| 1750105728 | 460 ppm | 45.2 C | 29.5 C | 1010.8 hPa | 68.8 % |
| 1750105368 | 450 ppm | 45.2 C | 29.5 C | 1010.8 hPa | 68 % |
| 1750105008 | 440 ppm | 45.2 C | 29.5 C | 1011.2 hPa | 68 % |
| 1750104648 | 420 ppm | 45.2 C | 29.5 C | 1011.2 hPa | 68.8 % |
| 1750104288 | 420 ppm | 46 C | 29.5 C | 1011.2 hPa | 68.4 % |
| 1750103928 | 400 ppm | 45.2 C | 29.5 C | 1011.2 hPa | 68.8 % |
| 1750103568 | 390 ppm | 45.2 C | 29.5 C | 1011.6 hPa | 68 % |
| 1750103208 | 390 ppm | 45.2 C | 29.5 C | 1011.2 hPa | 67.6 % |
| 1750102848 | 360 ppm | 45.2 C | 29.5 C | 1011.6 hPa | 68.4 % |
| 1750102488 | 330 ppm | 46 C | 30 C | 1012 hPa | 68.8 % |
| 1750102128 | 360 ppm | 46 C | 30 C | 1012 hPa | 68 % |
| 1750101768 | 430 ppm | 46 C | 29.5 C | 1011.6 hPa | 69.2 % |
| 1750101408 | 480 ppm | 46 C | 29.5 C | 1011.6 hPa | 68.4 % |
| 1750101048 | 450 ppm | 46 C | 30 C | 1011.2 hPa | 68 % |
| 1750100688 | 460 ppm | 46 C | 30 C | 1011.2 hPa | 68.4 % |
| 1750100328 | 450 ppm | 46 C | 29.5 C | 1011.2 hPa | 68.8 % |
| 1750099968 | 450 ppm | 46 C | 29.5 C | 1011.2 hPa | 69.2 % |
| 1750099608 | 450 ppm | 46 C | 29.5 C | 1011.2 hPa | 68.8 % |
*Used Equation Coefficients:
CO2: 0, 10, 0
CPU: 0, 0.4, 0
Temp: 0, 0.5, -25
Baro: 0, 0.4, 950
Load: 0, 0.4, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)