APRS Track Direct

My position About ☰

reset

TA1DF-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1DF-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1782520332	0.17 Load	52.58 DegC	1487 Mb	494 Pkt	147 Pkt
1782520033	0.17 Load	53.07 DegC	1494 Mb	434 Pkt	128 Pkt
1782519732	0.16 Load	52.1 DegC	1495 Mb	711 Pkt	139 Pkt
1782519432	0.16 Load	52.1 DegC	1492 Mb	524 Pkt	144 Pkt
1782519133	0.2 Load	52.58 DegC	1491 Mb	423 Pkt	141 Pkt
1782518832	0.21 Load	52.58 DegC	1497 Mb	446 Pkt	134 Pkt
1782518532	0.21 Load	53.07 DegC	1488 Mb	495 Pkt	117 Pkt
1782518233	0.25 Load	52.1 DegC	1493 Mb	404 Pkt	127 Pkt
1782517933	0.11 Load	54.04 DegC	1498 Mb	742 Pkt	149 Pkt
1782517632	0.13 Load	52.1 DegC	1492 Mb	495 Pkt	139 Pkt
1782517332	0.17 Load	52.58 DegC	1500 Mb	432 Pkt	120 Pkt
1782517033	0.17 Load	53.07 DegC	1496 Mb	446 Pkt	143 Pkt
1782516732	0.17 Load	53.07 DegC	1488 Mb	488 Pkt	140 Pkt
1782516432	0.23 Load	52.58 DegC	1489 Mb	478 Pkt	141 Pkt
1782516132	0.2 Load	52.58 DegC	1499 Mb	679 Pkt	144 Pkt
1782515832	0.2 Load	52.58 DegC	1496 Mb	506 Pkt	123 Pkt
1782515533	0.23 Load	53.56 DegC	1506 Mb	423 Pkt	125 Pkt
1782515233	0.16 Load	53.07 DegC	1498 Mb	419 Pkt	132 Pkt
1782514932	0.23 Load	53.07 DegC	1503 Mb	517 Pkt	142 Pkt
1782514632	0.16 Load	51.61 DegC	1499 Mb	428 Pkt	119 Pkt
1782514332	0.24 Load	53.07 DegC	1507 Mb	693 Pkt	118 Pkt
1782514033	0.19 Load	52.58 DegC	1507 Mb	515 Pkt	144 Pkt
1782513732	0.18 Load	53.07 DegC	1510 Mb	498 Pkt	143 Pkt
1782513432	0.2 Load	53.07 DegC	1508 Mb	472 Pkt	145 Pkt
1782513132	0.13 Load	52.58 DegC	1497 Mb	498 Pkt	141 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)