APRS Track Direct

My position About ☰

reset

IK2CHZ-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK2CHZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1836274426	13.8 Volt	450 Pkt	10 Pkt	52 Pcnt	4 Pkt
1836274276	13.8 Volt	420 Pkt	10 Pkt	52 Pcnt	0 Pkt
1770124733	13.8 Volt	170 Pkt	0 Pkt	31 Pcnt	0 Pkt
1770124133	13.8 Volt	180 Pkt	0 Pkt	33 Pcnt	1 Pkt
1770123533	13.8 Volt	160 Pkt	0 Pkt	31 Pcnt	0 Pkt
1770122933	13.8 Volt	160 Pkt	0 Pkt	30 Pcnt	0 Pkt
1770122333	13.8 Volt	160 Pkt	0 Pkt	30 Pcnt	0 Pkt
1770121733	13.8 Volt	140 Pkt	0 Pkt	27 Pcnt	0 Pkt
1770121133	13.8 Volt	110 Pkt	0 Pkt	23 Pcnt	1 Pkt
1770120534	13.8 Volt	100 Pkt	0 Pkt	23 Pcnt	1 Pkt
1770119934	13.8 Volt	100 Pkt	0 Pkt	21 Pcnt	2 Pkt
1770119334	13.8 Volt	90 Pkt	0 Pkt	21 Pcnt	2 Pkt
1770118734	13.8 Volt	110 Pkt	0 Pkt	24 Pcnt	0 Pkt
1770118134	13.8 Volt	120 Pkt	0 Pkt	27 Pcnt	0 Pkt
1770117534	13.8 Volt	130 Pkt	0 Pkt	27 Pcnt	0 Pkt
1770116934	13.8 Volt	120 Pkt	0 Pkt	27 Pcnt	1 Pkt
1770116334	13.8 Volt	130 Pkt	0 Pkt	28 Pcnt	0 Pkt
1770115734	13.8 Volt	140 Pkt	0 Pkt	30 Pcnt	0 Pkt
1770115134	13.8 Volt	110 Pkt	0 Pkt	26 Pcnt	0 Pkt
1770114534	13.8 Volt	110 Pkt	0 Pkt	26 Pcnt	0 Pkt
1770113934	13.8 Volt	120 Pkt	0 Pkt	26 Pcnt	0 Pkt
1770113334	13.8 Volt	130 Pkt	0 Pkt	28 Pcnt	0 Pkt
1770112734	13.8 Volt	120 Pkt	0 Pkt	28 Pcnt	0 Pkt
1770112134	13.8 Volt	130 Pkt	0 Pkt	30 Pcnt	0 Pkt
1770111534	13.8 Volt	130 Pkt	0 Pkt	31 Pcnt	0 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)