This is the latest recevied telemetry packets stored in our database for station/object JH4KWH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Solar* | Batt* | Vin* | Rx1h* | Temp* |
---|---|---|---|---|---|
1732465447 | -0 A | -0.35 A | 12.4 Volt | 0 Pkt | 52.7 'F |
1732464547 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 53.6 'F |
1732463646 | -0 A | -0.35 A | 12.4 Volt | 10 Pkt | 53.6 'F |
1732462745 | -0 A | -0.35 A | 12.4 Volt | 0 Pkt | 53.6 'F |
1732461844 | -0 A | -0.35 A | 12.4 Volt | 0 Pkt | 53.6 'F |
1732460943 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 53.6 'F |
1732460042 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 54.5 'F |
1732459141 | -0 A | -0.35 A | 12.4 Volt | 0 Pkt | 54.5 'F |
1732458241 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 54.5 'F |
1732457340 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 54.5 'F |
1732456439 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 54.5 'F |
1732455538 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 54.5 'F |
1732454637 | -0 A | -0.23 A | 12.48 Volt | 0 Pkt | 55.4 'F |
1732453736 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 55.4 'F |
1732452835 | -0 A | -0.23 A | 12.48 Volt | 0 Pkt | 55.4 'F |
1732451935 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 56.3 'F |
1732451034 | -0 A | -0.23 A | 12.48 Volt | 0 Pkt | 56.3 'F |
1732450133 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 57.2 'F |
1732449232 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 57.2 'F |
1732448331 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 58.1 'F |
1732447430 | -0 A | -0.23 A | 12.48 Volt | 0 Pkt | 58.1 'F |
1732446529 | -0 A | -0.23 A | 12.56 Volt | 0 Pkt | 58.1 'F |
1732445628 | -0 A | -0.35 A | 12.56 Volt | 0 Pkt | 59 'F |
1732444728 | -0 A | -0.35 A | 12.56 Volt | 0 Pkt | 59.9 'F |
1732443827 | -0 A | -0.35 A | 12.56 Volt | 0 Pkt | 60.8 'F |
*Used Equation Coefficients:
Solar: 0, 0.1156, -14.6812
Batt: 0, 0.1156, -14.6812
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Temp: 0, 0.9, -83.2
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)