APRS Track Direct

My position About ☰

reset

XE2KK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2KK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1739740524	0.97 Load	49.39 DegC	74 Mb	5314 Pkt	10227 Pkt
1739739624	0.74 Load	48.85 DegC	81 Mb	5415 Pkt	10281 Pkt
1739738725	0.72 Load	49.39 DegC	73 Mb	5246 Pkt	10270 Pkt
1739737824	0.71 Load	49.39 DegC	77 Mb	5482 Pkt	10385 Pkt
1739736924	0.75 Load	48.85 DegC	72 Mb	5300 Pkt	10441 Pkt
1739736025	0.58 Load	48.31 DegC	72 Mb	5463 Pkt	10443 Pkt
1739735124	0.81 Load	48.85 DegC	73 Mb	5326 Pkt	10407 Pkt
1739734225	0.63 Load	48.31 DegC	69 Mb	5337 Pkt	10216 Pkt
1739733325	0.9 Load	48.31 DegC	76 Mb	5385 Pkt	10406 Pkt
1739732424	0.77 Load	47.77 DegC	76 Mb	5237 Pkt	10439 Pkt
1739731525	0.83 Load	48.31 DegC	76 Mb	5315 Pkt	10461 Pkt
1739730625	0.57 Load	47.77 DegC	76 Mb	5196 Pkt	10174 Pkt
1739729724	0.98 Load	48.31 DegC	70 Mb	5432 Pkt	10329 Pkt
1739728825	0.72 Load	47.77 DegC	78 Mb	5317 Pkt	10479 Pkt
1739727925	0.77 Load	48.31 DegC	75 Mb	5291 Pkt	10487 Pkt
1739727024	0.54 Load	47.77 DegC	74 Mb	5053 Pkt	10310 Pkt
1739726125	0.81 Load	48.31 DegC	76 Mb	5292 Pkt	10520 Pkt
1739725224	0.83 Load	47.77 DegC	78 Mb	5375 Pkt	10560 Pkt
1739724325	0.9 Load	47.77 DegC	73 Mb	5309 Pkt	10503 Pkt
1739723425	0.58 Load	47.77 DegC	76 Mb	5358 Pkt	10375 Pkt
1739722524	0.81 Load	48.31 DegC	77 Mb	5330 Pkt	10643 Pkt
1739721625	0.52 Load	47.24 DegC	71 Mb	5511 Pkt	11171 Pkt
1739720725	1.16 Load	46.7 DegC	74 Mb	4982 Pkt	9792 Pkt
1739719824	0.61 Load	47.77 DegC	67 Mb	5308 Pkt	10424 Pkt
1739718924	0.63 Load	47.24 DegC	72 Mb	5402 Pkt	10540 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)