This is the latest recevied telemetry packets stored in our database for station/object DL1TK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732274824 | 22.7 deg C | 36.4 % | 1008.2 hPa | 0 | 0 |
| 1732273924 | 22.7 deg C | 36.9 % | 1007.6 hPa | 0 | 0 |
| 1732273024 | 22.6 deg C | 36.3 % | 1007.9 hPa | 0 | 0 |
| 1732272972 | 22.6 deg C | 36.3 % | 1009 hPa | 0 | 0 |
| 1732272072 | 22.7 deg C | 36.8 % | 1008.5 hPa | 0 | 0 |
| 1732271172 | 22.7 deg C | 36.2 % | 1008.1 hPa | 0 | 0 |
| 1732270272 | 22.7 deg C | 36.6 % | 1008 hPa | 0 | 0 |
| 1732269372 | 22.7 deg C | 36.5 % | 1008.6 hPa | 0 | 0 |
| 1732268472 | 22.7 deg C | 36.8 % | 1008.7 hPa | 0 | 0 |
| 1732267572 | 22.7 deg C | 37.7 % | 1007.2 hPa | 0 | 0 |
| 1732266672 | 22.6 deg C | 36.9 % | 1006.6 hPa | 0 | 0 |
| 1732265771 | 22.6 deg C | 36.4 % | 1007.7 hPa | 0 | 0 |
| 1732264871 | 22.5 deg C | 37.1 % | 1006.6 hPa | 0 | 0 |
| 1732263971 | 22.5 deg C | 36.7 % | 1006.5 hPa | 0 | 0 |
| 1732263071 | 22.5 deg C | 36.4 % | 1007.3 hPa | 0 | 0 |
| 1732262171 | 22.6 deg C | 36.7 % | 1008.1 hPa | 0 | 0 |
| 1732261271 | 22.5 deg C | 36.7 % | 1007.6 hPa | 0 | 0 |
| 1732260371 | 22.4 deg C | 37.1 % | 1006.9 hPa | 0 | 0 |
| 1732259471 | 22.4 deg C | 36.7 % | 1007.1 hPa | 0 | 0 |
| 1732258571 | 22.4 deg C | 36.9 % | 1006.8 hPa | 0 | 0 |
| 1732257670 | 22.4 deg C | 37 % | 1005.4 hPa | 0 | 0 |
| 1732256770 | 22.4 deg C | 36.9 % | 1004.8 hPa | 0 | 0 |
| 1732255870 | 22.3 deg C | 37 % | 1005 hPa | 0 | 0 |
| 1732254970 | 22.3 deg C | 36.8 % | 1005.8 hPa | 0 | 0 |
| 1732254070 | 22.3 deg C | 37 % | 1004.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)