APRS Track Direct

My position About ☰

reset

W2JKT-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W2JKT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732294323	0.08 Rx Erlang	0.01 Tx Erlang	65 count/10m	8 count/10m	10 count/10m
1732293123	0.06 Rx Erlang	0.01 Tx Erlang	60 count/10m	1 count/10m	8 count/10m
1732291923	0.07 Rx Erlang	0.01 Tx Erlang	62 count/10m	3 count/10m	9 count/10m
1732290723	0.08 Rx Erlang	0.02 Tx Erlang	78 count/10m	4 count/10m	13 count/10m
1732289523	0.08 Rx Erlang	0.01 Tx Erlang	73 count/10m	3 count/10m	12 count/10m
1732288323	0.09 Rx Erlang	0.02 Tx Erlang	79 count/10m	13 count/10m	14 count/10m
1732287123	0.08 Rx Erlang	0.02 Tx Erlang	76 count/10m	4 count/10m	17 count/10m
1732285923	0.07 Rx Erlang	0.01 Tx Erlang	65 count/10m	2 count/10m	9 count/10m
1732284723	0.09 Rx Erlang	0.02 Tx Erlang	81 count/10m	10 count/10m	17 count/10m
1732283523	0.09 Rx Erlang	0.03 Tx Erlang	90 count/10m	14 count/10m	21 count/10m
1732282323	0.1 Rx Erlang	0.02 Tx Erlang	92 count/10m	12 count/10m	20 count/10m
1732281123	0.07 Rx Erlang	0.02 Tx Erlang	67 count/10m	8 count/10m	15 count/10m
1732279923	0.07 Rx Erlang	0.02 Tx Erlang	72 count/10m	11 count/10m	12 count/10m
1732278723	0.09 Rx Erlang	0.02 Tx Erlang	84 count/10m	17 count/10m	16 count/10m
1732277523	0.1 Rx Erlang	0.02 Tx Erlang	95 count/10m	13 count/10m	18 count/10m
1732276323	0.09 Rx Erlang	0.01 Tx Erlang	80 count/10m	11 count/10m	12 count/10m
1732275123	0.09 Rx Erlang	0.01 Tx Erlang	70 count/10m	9 count/10m	12 count/10m
1732273923	0.08 Rx Erlang	0.02 Tx Erlang	82 count/10m	7 count/10m	14 count/10m
1732272723	0.08 Rx Erlang	0.01 Tx Erlang	71 count/10m	3 count/10m	8 count/10m
1732271523	0.07 Rx Erlang	0.01 Tx Erlang	66 count/10m	3 count/10m	6 count/10m
1732270323	0.08 Rx Erlang	0.01 Tx Erlang	76 count/10m	3 count/10m	7 count/10m
1732269123	0.08 Rx Erlang	0.01 Tx Erlang	74 count/10m	2 count/10m	8 count/10m
1732267923	0.07 Rx Erlang	0.01 Tx Erlang	66 count/10m	4 count/10m	9 count/10m
1732266723	0.08 Rx Erlang	0.01 Tx Erlang	75 count/10m	4 count/10m	8 count/10m
1732265523	0.06 Rx Erlang	0.01 Tx Erlang	58 count/10m	2 count/10m	7 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)