APRS Track Direct

My position About ☰

reset

LANEMT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LANEMT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Rx1h*	Rx10m*	Dig1h*	Temp*	Vin*
1836274575	590 Pkt	94 Pkt	20 Pck	72.7 F	13.5 Volt
1782527497	440 Pkt	75 Pkt	10 Pck	63.7 F	13.43 Volt
1782526297	430 Pkt	51 Pkt	10 Pck	64.6 F	13.5 Volt
1782523897	520 Pkt	74 Pkt	10 Pck	65.5 F	13.43 Volt
1782522697	510 Pkt	67 Pkt	20 Pck	65.5 F	13.43 Volt
1782521497	470 Pkt	73 Pkt	40 Pck	65.5 F	13.43 Volt
1782520297	460 Pkt	77 Pkt	50 Pck	65.5 F	13.43 Volt
1782519097	540 Pkt	53 Pkt	60 Pck	65.5 F	13.5 Volt
1782517898	610 Pkt	58 Pkt	50 Pck	66.4 F	13.43 Volt
1782516698	650 Pkt	99 Pkt	30 Pck	66.4 F	13.43 Volt
1782515497	590 Pkt	94 Pkt	10 Pck	66.4 F	13.5 Volt
1782514297	560 Pkt	81 Pkt	0 Pck	66.4 F	13.5 Volt
1782513097	530 Pkt	76 Pkt	0 Pck	65.5 F	13.5 Volt
1782511897	540 Pkt	81 Pkt	0 Pck	65.5 F	13.5 Volt
1782510698	530 Pkt	80 Pkt	0 Pck	64.6 F	13.43 Volt
1782509497	560 Pkt	82 Pkt	0 Pck	64.6 F	13.43 Volt
1782508298	550 Pkt	71 Pkt	10 Pck	64.6 F	13.43 Volt
1782507097	530 Pkt	93 Pkt	20 Pck	64.6 F	13.5 Volt
1782505898	510 Pkt	85 Pkt	30 Pck	65.5 F	13.5 Volt
1782504698	530 Pkt	63 Pkt	40 Pck	65.5 F	13.5 Volt
1782503499	540 Pkt	74 Pkt	30 Pck	65.5 F	13.43 Volt
1782502299	570 Pkt	86 Pkt	30 Pck	64.6 F	13.43 Volt
1782501098	560 Pkt	67 Pkt	20 Pck	64.6 F	13.5 Volt
1782499898	590 Pkt	93 Pkt	10 Pck	64.6 F	13.5 Volt
1782498698	580 Pkt	93 Pkt	10 Pck	64.6 F	13.5 Volt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Dig1h: 0, 10, 0

Temp: 0, 0.9, -83

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)