This is the latest recevied telemetry packets stored in our database for station/object UB0JBX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | LoadAvg5m* | MemUsed* | Temp* | AudioLvl* | Value5* |
|---|---|---|---|---|---|
| 1770173298 | 0.7 | 7 % | 50 C | 98 | 0 |
| 1770172398 | 0.6 | 7 % | 50 C | 97 | 0 |
| 1770171499 | 0.7 | 7 % | 50 C | 98 | 0 |
| 1770170598 | 0.7 | 7 % | 50 C | 97 | 0 |
| 1770169698 | 0.6 | 7 % | 50 C | 97 | 0 |
| 1770168798 | 0.7 | 7 % | 50 C | 97 | 0 |
| 1770167899 | 0.7 | 7 % | 51 C | 98 | 0 |
| 1770166999 | 0.7 | 7 % | 50 C | 99 | 0 |
| 1770166098 | 0.7 | 7 % | 51 C | 97 | 0 |
| 1770165198 | 0.7 | 7 % | 51 C | 98 | 0 |
| 1770164299 | 0.7 | 7 % | 51 C | 98 | 0 |
| 1770163399 | 0.6 | 7 % | 51 C | 98 | 0 |
| 1770162498 | 0.7 | 7 % | 50 C | 97 | 0 |
| 1770161598 | 0.7 | 7 % | 50 C | 98 | 0 |
| 1770160699 | 0.8 | 7 % | 51 C | 98 | 0 |
| 1770159799 | 0.8 | 6 % | 50 C | 98 | 0 |
| 1770158899 | 0.8 | 6 % | 50 C | 98 | 0 |
| 1770157998 | 0.6 | 6 % | 50 C | 97 | 0 |
| 1770157099 | 0.6 | 7 % | 51 C | 99 | 0 |
| 1770156199 | 0.8 | 7 % | 51 C | 97 | 0 |
| 1770155298 | 0.7 | 7 % | 51 C | 97 | 0 |
| 1770154398 | 0.7 | 7 % | 51 C | 98 | 0 |
| 1770153499 | 0.7 | 7 % | 51 C | 99 | 0 |
| 1770152599 | 0.7 | 6 % | 51 C | 98 | 0 |
| 1770151699 | 0.7 | 6 % | 50 C | 98 | 0 |
*Used Equation Coefficients:
LoadAvg5m: 0, 0.1, 0
MemUsed: 0, 1, 0
Temp: 0, 1, 0
AudioLvl: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)