This is the latest recevied telemetry packets stored in our database for station/object DL1VED-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1758197112 | 985.5 hPa | 29.4 C deg | 38.8 % | 135 - | 0 C deg |
| 1758195312 | 985.7 hPa | 29.1 C deg | 39.3 % | 134 - | 0 C deg |
| 1758193512 | 985.7 hPa | 29.5 C deg | 38.1 % | 135 - | 0 C deg |
| 1758191712 | 985.8 hPa | 28.6 C deg | 40 % | 136 - | 0 C deg |
| 1758189911 | 985.7 hPa | 28.3 C deg | 40.4 % | 136 - | 0 C deg |
| 1758188111 | 985.8 hPa | 28.3 C deg | 40.4 % | 137 - | 0 C deg |
| 1758186311 | 985.7 hPa | 28.1 C deg | 40.7 % | 137 - | 0 C deg |
| 1758184511 | 985.6 hPa | 27.8 C deg | 41.2 % | 138 - | 0 C deg |
| 1758182710 | 985.4 hPa | 27.5 C deg | 41.8 % | 138 - | 0 C deg |
| 1758180910 | 985.2 hPa | 27.3 C deg | 42.1 % | 138 - | 0 C deg |
| 1758179110 | 985.1 hPa | 27.2 C deg | 42.3 % | 137 - | 0 C deg |
| 1758177309 | 984.9 hPa | 26.9 C deg | 42.9 % | 136 - | 0 C deg |
| 1758175509 | 984.7 hPa | 25.8 C deg | 45.5 % | 136 - | 0 C deg |
| 1758173709 | 984.6 hPa | 25.6 C deg | 46.1 % | 136 - | 0 C deg |
| 1758171909 | 984.2 hPa | 25.5 C deg | 45.7 % | 139 - | 0 C deg |
| 1758137705 | 984 hPa | 27.3 C deg | 40.7 % | 154 - | 0 C deg |
| 1758134104 | 983.8 hPa | 27.1 C deg | 41.1 % | 153 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)