APRS Track Direct

My position About ☰

reset

VR2WUK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VR2WUK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU*	Temp*	FreeM*	RxP*
1744109972	0.18 Load	51.54 °C	615 Mb	0 Pkt
1744109674	0.19 Load	49.39 °C	615 Mb	0 Pkt
1744109366	0.22 Load	48.85 °C	614 Mb	0 Pkt
1744109057	0.2 Load	49.39 °C	615 Mb	0 Pkt
1744108756	0.24 Load	49.93 °C	615 Mb	0 Pkt
1744108449	0.22 Load	49.39 °C	615 Mb	0 Pkt
1744107840	0.23 Load	49.39 °C	615 Mb	0 Pkt
1744107532	0.24 Load	49.39 °C	615 Mb	0 Pkt
1744107223	0.24 Load	49.93 °C	616 Mb	0 Pkt
1744106918	0.18 Load	50.46 °C	615 Mb	0 Pkt
1744106614	0.24 Load	49.39 °C	615 Mb	0 Pkt
1744106308	0.18 Load	49.93 °C	616 Mb	0 Pkt
1744106011	0.25 Load	49.39 °C	616 Mb	0 Pkt
1744105702	0.26 Load	49.39 °C	617 Mb	0 Pkt
1744105394	0.22 Load	50.46 °C	614 Mb	0 Pkt
1744105097	0.23 Load	49.39 °C	617 Mb	0 Pkt
1744104788	0.23 Load	49.39 °C	617 Mb	0 Pkt
1744104479	0.24 Load	49.39 °C	615 Mb	0 Pkt
1744104180	0.24 Load	49.39 °C	617 Mb	0 Pkt
1744103870	0.18 Load	50.46 °C	618 Mb	0 Pkt
1744103563	0.21 Load	50.46 °C	617 Mb	1 Pkt
1744103267	0.19 Load	49.39 °C	616 Mb	0 Pkt
1744102962	0.21 Load	51.54 °C	617 Mb	0 Pkt
1744102657	0.21 Load	51 °C	617 Mb	0 Pkt
1744102357	0.2 Load	51.54 °C	618 Mb	0 Pkt

*Used Equation Coefficients:

CPU: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)