This is the latest recevied telemetry packets stored in our database for station/object ER-IR0CF. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786722248 | 1 | 722 | 1 | 25 | 0 |
| 1786721648 | 0 | 123 | 0 | 12 | 0 |
| 1786721048 | 35 | 192 | 10 | 15 | 0 |
| 1786720448 | 307 | 921 | 54 | 27 | 0 |
| 1786719848 | 310 | 792 | 44 | 29 | 0 |
| 1786719248 | 28 | 360 | 7 | 25 | 0 |
| 1786718648 | 0 | 113 | 0 | 6 | 0 |
| 1786718048 | 3 | 139 | 2 | 12 | 0 |
| 1786717448 | 5 | 850 | 2 | 19 | 0 |
| 1786716848 | 0 | 224 | 0 | 24 | 0 |
| 1786716248 | 0 | 59 | 0 | 5 | 0 |
| 1786715648 | 0 | 234 | 1 | 18 | 0 |
| 1786715048 | 0 | 96 | 0 | 12 | 0 |
| 1786714448 | 6 | 169 | 2 | 12 | 0 |
| 1786713848 | 0 | 57 | 0 | 3 | 0 |
| 1786713248 | 7 | 68 | 1 | 8 | 0 |
| 1786712648 | 12 | 50 | 1 | 5 | 0 |
| 1786712048 | 0 | 16 | 0 | 1 | 0 |
| 1786711448 | 0 | 77 | 0 | 10 | 0 |
| 1786710848 | 0 | 18 | 0 | 1 | 0 |
| 1786710248 | 0 | 120 | 0 | 14 | 0 |
| 1786709648 | 0 | 110 | 0 | 9 | 0 |
| 1786709048 | 0 | 28 | 0 | 4 | 0 |
| 1786708448 | 1 | 138 | 1 | 12 | 0 |
| 1786707848 | 2 | 632 | 2 | 13 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)