APRS Track Direct

My position About ☰

reset

ED2ZAD-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED2ZAD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1758181169	13.35 Volt	1010 Pkt	300 Pkt	58 Pcnt	25.5 C
1758180269	13.28 Volt	980 Pkt	290 Pkt	57 Pcnt	25.5 C
1758179369	13.28 Volt	950 Pkt	300 Pkt	55 Pcnt	25.5 C
1758178469	13.28 Volt	960 Pkt	300 Pkt	56 Pcnt	25.5 C
1758177569	13.28 Volt	910 Pkt	290 Pkt	56 Pcnt	25.5 C
1758176669	13.28 Volt	940 Pkt	300 Pkt	58 Pcnt	25.5 C
1758175769	13.28 Volt	950 Pkt	290 Pkt	58 Pcnt	25.5 C
1758174870	13.28 Volt	970 Pkt	290 Pkt	59 Pcnt	26 C
1758173970	13.28 Volt	960 Pkt	300 Pkt	57 Pcnt	26 C
1758173070	13.28 Volt	930 Pkt	300 Pkt	55 Pcnt	26 C
1758172170	13.28 Volt	920 Pkt	310 Pkt	57 Pcnt	26 C
1758171270	13.28 Volt	890 Pkt	310 Pkt	57 Pcnt	26 C
1758170370	13.28 Volt	870 Pkt	300 Pkt	57 Pcnt	26.5 C
1758169470	13.28 Volt	880 Pkt	290 Pkt	58 Pcnt	26.5 C
1758168570	13.28 Volt	860 Pkt	290 Pkt	57 Pcnt	26.5 C
1758167670	13.28 Volt	860 Pkt	280 Pkt	56 Pcnt	26.5 C
1758166770	13.28 Volt	880 Pkt	280 Pkt	57 Pcnt	27 C
1758165870	13.28 Volt	880 Pkt	280 Pkt	56 Pcnt	27 C
1758164970	13.28 Volt	870 Pkt	270 Pkt	55 Pcnt	27.5 C
1758164070	13.28 Volt	840 Pkt	260 Pkt	56 Pcnt	27.5 C
1758163170	13.28 Volt	770 Pkt	260 Pkt	54 Pcnt	27.5 C
1758162270	13.28 Volt	720 Pkt	240 Pkt	53 Pcnt	27.5 C
1758161370	13.35 Volt	660 Pkt	220 Pkt	52 Pcnt	28 C
1758160470	13.28 Volt	690 Pkt	220 Pkt	54 Pcnt	28 C
1758159570	13.28 Volt	710 Pkt	230 Pkt	57 Pcnt	28.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)