APRS Track Direct

My position About ☰

reset

FW0690 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object FW0690. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vcc*	RSSI*	Load*	IRed*	Visb*
1790676062	3.48 V	-69 dBm	6 %	4352 u	10240 u
1790675702	3.48 V	-70 dBm	5.2 %	4352 u	9984 u
1790675342	3.48 V	-70 dBm	5.2 %	3840 u	8960 u
1790674982	3.48 V	-72 dBm	6 %	3840 u	8448 u
1790674622	3.48 V	-71 dBm	6 %	3584 u	8192 u
1790674262	3.48 V	-70 dBm	6 %	3072 u	7168 u
1790673902	3.48 V	-72 dBm	5.2 %	4096 u	9216 u
1790673542	3.48 V	-70 dBm	5.2 %	5888 u	12032 u
1790673182	3.48 V	-70 dBm	6 %	2816 u	6656 u
1790672822	3.48 V	-69 dBm	6 %	3328 u	7680 u
1790672462	3.48 V	-70 dBm	5.6 %	3072 u	7168 u
1790672102	3.48 V	-69 dBm	5.2 %	3328 u	7680 u
1790671742	3.48 V	-69 dBm	5.2 %	3072 u	6912 u
1790671382	3.48 V	-70 dBm	5.2 %	3072 u	7168 u
1790671022	3.48 V	-70 dBm	6 %	3328 u	7424 u
1790670662	3.48 V	-68 dBm	6 %	3072 u	6912 u
1790670302	3.48 V	-70 dBm	5.2 %	2816 u	6400 u
1790669942	3.48 V	-71 dBm	5.2 %	2816 u	6144 u
1790669582	3.48 V	-69 dBm	5.2 %	3584 u	7936 u
1790669222	3.48 V	-69 dBm	6 %	3328 u	7424 u
1790668862	3.48 V	-70 dBm	6 %	2816 u	6400 u
1790668502	3.48 V	-69 dBm	5.2 %	2816 u	6144 u
1790668142	3.48 V	-70 dBm	5.2 %	2560 u	5632 u
1790667782	3.48 V	-71 dBm	5.2 %	2304 u	5376 u
1790667422	3.48 V	-70 dBm	6 %	2304 u	5120 u

*Used Equation Coefficients:

Vcc: 0, 0.004, 2.5

RSSI: 0, -1, 0

Load: 0, 0.4, 0

IRed: 0, 256, 0

Visb: 0, 256, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)