APRS Track Direct

My position About ☰

reset

UBUTTE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object UBUTTE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Solar*	Rx1h*	Cur*
1758204528	13.2 Volt	17.3 Volts	690 Pkt	1.37 A
1758204527	13.2 Volt	17.3 Volts	690 Pkt	1.37 A
1758204227	13.1 Volt	17.7 Volts	700 Pkt	1.37 A
1758203929	12.9 Volt	17.3 Volts	690 Pkt	1.37 A
1758203927	12.9 Volt	17.3 Volts	690 Pkt	1.37 A
1758203627	12.8 Volt	16.5 Volts	680 Pkt	1.37 A
1758203328	12.7 Volt	17.2 Volts	690 Pkt	1.37 A
1758203327	12.7 Volt	17.2 Volts	690 Pkt	1.37 A
1758203028	12.7 Volt	13.9 Volts	680 Pkt	1.37 A
1758202728	12.6 Volt	15 Volts	680 Pkt	1.37 A
1758202727	12.6 Volt	15 Volts	680 Pkt	1.37 A
1758202427	12.6 Volt	14.9 Volts	660 Pkt	1.37 A
1758202128	12.6 Volt	14.9 Volts	630 Pkt	1.37 A
1758202128	12.6 Volt	14.9 Volts	630 Pkt	1.37 A
1758201827	12.6 Volt	14.8 Volts	620 Pkt	1.37 A
1758201528	12.6 Volt	14.7 Volts	630 Pkt	1.37 A
1758201528	12.6 Volt	14.7 Volts	630 Pkt	1.37 A
1758201228	12.6 Volt	14.7 Volts	610 Pkt	1.37 A
1758200928	12.5 Volt	14.4 Volts	620 Pkt	1.37 A
1758200928	12.5 Volt	14.4 Volts	620 Pkt	1.37 A
1758200628	12.5 Volt	14.3 Volts	600 Pkt	1.37 A
1758200328	12.5 Volt	15.2 Volts	620 Pkt	1.37 A
1758200328	12.5 Volt	15.2 Volts	620 Pkt	1.37 A
1758200028	12.5 Volt	13.1 Volts	610 Pkt	1.37 A
1758199728	12.5 Volt	10 Volts	610 Pkt	1.37 A

*Used Equation Coefficients:

Vin: 0, 0.1, 0

Solar: 0, 0.1, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Cur: 0, 0.1953, -24.8031

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)