This is the latest recevied telemetry packets stored in our database for station/object SR9VJK-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790642539 | 0 Count | 812 Count | 0 Count | 0 VDC | 0 VDC |
| 1790640739 | 0 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1790638939 | 0 Count | 542 Count | 0 Count | 0 VDC | 0 VDC |
| 1790637139 | 0 Count | 408 Count | 0 Count | 0 VDC | 0 VDC |
| 1790635339 | 0 Count | 268 Count | 0 Count | 0 VDC | 0 VDC |
| 1790633539 | 0 Count | 141 Count | 0 Count | 0 VDC | 0 VDC |
| 1790631738 | 0 Count | 1076 Count | 0 Count | 0 VDC | 0 VDC |
| 1790629938 | 0 Count | 969 Count | 0 Count | 0 VDC | 0 VDC |
| 1790628138 | 0 Count | 864 Count | 0 Count | 0 VDC | 0 VDC |
| 1790626338 | 0 Count | 741 Count | 0 Count | 0 VDC | 0 VDC |
| 1790624538 | 0 Count | 634 Count | 0 Count | 0 VDC | 0 VDC |
| 1790622738 | 0 Count | 515 Count | 0 Count | 0 VDC | 0 VDC |
| 1790620937 | 0 Count | 411 Count | 0 Count | 0 VDC | 0 VDC |
| 1790619137 | 0 Count | 271 Count | 0 Count | 0 VDC | 0 VDC |
| 1790617337 | 0 Count | 204 Count | 0 Count | 0 VDC | 0 VDC |
| 1790615537 | 0 Count | 107 Count | 0 Count | 0 VDC | 0 VDC |
| 1790613738 | 0 Count | 40 Count | 0 Count | 0 VDC | 0 VDC |
| 1790611938 | 0 Count | 1005 Count | 0 Count | 0 VDC | 0 VDC |
| 1790610137 | 0 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1790608337 | 0 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1790606537 | 0 Count | 728 Count | 0 Count | 0 VDC | 0 VDC |
| 1790604737 | 0 Count | 647 Count | 0 Count | 0 VDC | 0 VDC |
| 1790602937 | 0 Count | 566 Count | 0 Count | 0 VDC | 0 VDC |
| 1790601137 | 0 Count | 474 Count | 0 Count | 0 VDC | 0 VDC |
| 1790599337 | 0 Count | 370 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)