APRS Track Direct

My position About ☰

reset

YB3DE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB3DE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RSSI*	Voltage*
1758190596	8 Pkt	-58 dBm	9.84 V
1758190360	37 Pkt	-56 dBm	9.86 V
1758189791	33 Pkt	-57 dBm	9.84 V
1758189238	42 Pkt	-57 dBm	9.84 V
1758188644	42 Pkt	-56 dBm	9.86 V
1758188047	36 Pkt	-57 dBm	9.88 V
1758187482	44 Pkt	-56 dBm	9.88 V
1758186294	36 Pkt	-57 dBm	9.88 V
1758185731	37 Pkt	-57 dBm	9.86 V
1758185159	33 Pkt	-57 dBm	9.86 V
1758184251	22 Pkt	-56 dBm	9.84 V
1758183928	18 Pkt	-58 dBm	9.86 V
1758183927	18 Pkt	-60 dBm	9.86 V
1758183604	31 Pkt	-56 dBm	9.84 V
1758183279	17 Pkt	-59 dBm	9.86 V
1758182956	16 Pkt	-58 dBm	9.84 V
1758182634	21 Pkt	-60 dBm	9.88 V
1758182310	12 Pkt	-59 dBm	9.86 V
1758181988	12 Pkt	-56 dBm	9.86 V
1758181665	18 Pkt	-56 dBm	9.86 V
1758181341	14 Pkt	-56 dBm	9.86 V
1758181019	18 Pkt	-58 dBm	9.86 V
1758180696	17 Pkt	-55 dBm	9.88 V
1758180374	12 Pkt	-56 dBm	9.84 V
1758180052	19 Pkt	-58 dBm	9.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)