APRS Track Direct

My position About ☰

reset

XE1BRX-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE1BRX-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1836274623	13.28 Volt	40 Pkt	10 Pkt	92 Pcnt	27.87 C
1836274473	13.28 Volt	40 Pkt	10 Pkt	93 Pcnt	27.87 C
1836274323	13.28 Volt	40 Pkt	10 Pkt	90 Pcnt	27.87 C
1836274173	13.28 Volt	40 Pkt	10 Pkt	93 Pcnt	27.87 C
1836274023	13.28 Volt	50 Pkt	10 Pkt	89 Pcnt	27.87 C
1782529735	14.1 Volt	30 Pkt	0 Pkt	75 Pcnt	27.87 C
1782529435	14.18 Volt	20 Pkt	0 Pkt	69 Pcnt	27.87 C
1782529135	14.18 Volt	20 Pkt	0 Pkt	72 Pcnt	27.36 C
1782528835	14.18 Volt	20 Pkt	0 Pkt	72 Pcnt	27.87 C
1782528535	13.28 Volt	20 Pkt	0 Pkt	78 Pcnt	28.37 C
1782528235	13.35 Volt	20 Pkt	0 Pkt	78 Pcnt	28.37 C
1782527935	13.35 Volt	30 Pkt	0 Pkt	81 Pcnt	28.37 C
1782527635	13.35 Volt	20 Pkt	0 Pkt	82 Pcnt	27.87 C
1782527335	13.35 Volt	20 Pkt	0 Pkt	85 Pcnt	28.37 C
1782527035	13.35 Volt	20 Pkt	0 Pkt	83 Pcnt	28.37 C
1782526735	13.35 Volt	20 Pkt	0 Pkt	83 Pcnt	28.37 C
1782526435	13.35 Volt	20 Pkt	0 Pkt	85 Pcnt	28.37 C
1782526135	13.35 Volt	20 Pkt	0 Pkt	85 Pcnt	28.37 C
1782525835	13.28 Volt	20 Pkt	0 Pkt	87 Pcnt	28.37 C
1782525535	13.28 Volt	20 Pkt	0 Pkt	91 Pcnt	28.37 C
1782525235	13.35 Volt	20 Pkt	0 Pkt	92 Pcnt	28.37 C
1782524935	13.35 Volt	20 Pkt	0 Pkt	100 Pcnt	28.37 C
1782524635	13.35 Volt	50 Pkt	0 Pkt	98 Pcnt	28.37 C
1782524335	13.35 Volt	50 Pkt	0 Pkt	98 Pcnt	28.37 C
1782524035	13.35 Volt	50 Pkt	0 Pkt	98 Pcnt	28.37 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0.0005247, 0.3137172, -47.6223

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)