APRS Track Direct

My position About ☰

reset

KF8I Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KF8I. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836273955	13.95 Volt	240 Pkt	0 Pkt	95 Pcnt
1778039684	13.73 Volt	450 Pkt	0 Pkt	88 Pcnt
1778038004	13.73 Volt	460 Pkt	0 Pkt	87 Pcnt
1778036324	13.73 Volt	500 Pkt	0 Pkt	86 Pcnt
1778034644	13.73 Volt	520 Pkt	0 Pkt	87 Pcnt
1778032964	13.73 Volt	500 Pkt	0 Pkt	86 Pcnt
1778031284	13.73 Volt	510 Pkt	0 Pkt	83 Pcnt
1778029604	13.73 Volt	550 Pkt	0 Pkt	81 Pcnt
1778027924	13.73 Volt	620 Pkt	0 Pkt	84 Pcnt
1778026244	13.73 Volt	680 Pkt	0 Pkt	85 Pcnt
1778024564	13.73 Volt	710 Pkt	10 Pkt	84 Pcnt
1778022884	13.73 Volt	700 Pkt	10 Pkt	85 Pcnt
1778021204	13.73 Volt	680 Pkt	0 Pkt	87 Pcnt
1778019524	13.73 Volt	720 Pkt	0 Pkt	89 Pcnt
1778017844	13.73 Volt	690 Pkt	0 Pkt	92 Pcnt
1778016164	13.73 Volt	590 Pkt	0 Pkt	89 Pcnt
1778014484	13.73 Volt	590 Pkt	0 Pkt	85 Pcnt
1778012804	13.73 Volt	610 Pkt	0 Pkt	91 Pcnt
1778011124	13.73 Volt	680 Pkt	10 Pkt	93 Pcnt
1778009444	13.73 Volt	680 Pkt	0 Pkt	93 Pcnt
1778007764	13.73 Volt	640 Pkt	0 Pkt	92 Pcnt
1778006084	13.73 Volt	620 Pkt	0 Pkt	93 Pcnt
1778004404	13.73 Volt	600 Pkt	0 Pkt	93 Pcnt
1778002724	13.73 Volt	600 Pkt	0 Pkt	91 Pcnt
1778001044	13.73 Volt	590 Pkt	0 Pkt	90 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)