APRS Track Direct

My position About ☰

reset

HS0TK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS0TK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786718143	60 Pkt	3 Pkt	2 Pkt	-55 dBm	15.13 V
1786717214	99 Pkt	3 Pkt	2 Pkt	-58 dBm	15.16 V
1786716284	47 Pkt	2 Pkt	2 Pkt	-54 dBm	15.16 V
1786715356	38 Pkt	2 Pkt	2 Pkt	-57 dBm	15.16 V
1786714430	47 Pkt	3 Pkt	3 Pkt	-58 dBm	15.05 V
1786713502	48 Pkt	3 Pkt	2 Pkt	-53 dBm	15.16 V
1786712573	46 Pkt	2 Pkt	1 Pkt	-56 dBm	15.16 V
1786711645	45 Pkt	3 Pkt	3 Pkt	-55 dBm	15.16 V
1786710718	42 Pkt	3 Pkt	3 Pkt	-62 dBm	15.07 V
1786709790	43 Pkt	3 Pkt	2 Pkt	-55 dBm	15.07 V
1786708863	54 Pkt	3 Pkt	3 Pkt	-50 dBm	15.16 V
1786707934	49 Pkt	3 Pkt	3 Pkt	-58 dBm	15.07 V
1786707006	63 Pkt	2 Pkt	1 Pkt	-52 dBm	15.18 V
1786706077	82 Pkt	1 Pkt	0 Pkt	-51 dBm	15.18 V
1786705148	6 Pkt	0 Pkt	0 Pkt	-56 dBm	15.07 V
1786704157	52 Pkt	3 Pkt	3 Pkt	-58 dBm	15.16 V
1786703230	48 Pkt	1 Pkt	1 Pkt	-58 dBm	15.16 V
1786702302	119 Pkt	3 Pkt	2 Pkt	-51 dBm	15.16 V
1786701369	70 Pkt	2 Pkt	2 Pkt	-54 dBm	15.16 V
1786701368	70 Pkt	2 Pkt	2 Pkt	-56 dBm	15.16 V
1786700439	27 Pkt	3 Pkt	2 Pkt	-55 dBm	15.16 V
1786699511	57 Pkt	4 Pkt	4 Pkt	-55 dBm	15.05 V
1786698585	70 Pkt	19 Pkt	13 Pkt	-55 dBm	15.11 V
1786697654	62 Pkt	3 Pkt	1 Pkt	-55 dBm	15.16 V
1786696726	62 Pkt	3 Pkt	1 Pkt	-57 dBm	15.16 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)