APRS Track Direct

My position About ☰

reset

VO2AGO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VO2AGO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	LiPo*	IndoorTemp*	FreezerTemp*	BatteryTemp*
1836274715	12.83 V	11.1 V	10.9 C	10.9 C	50 C
1836274416	12.76 V	11.1 V	10.8 C	10.9 C	50 C
1836274265	12.81 V	11.1 V	10.9 C	11 C	50 C
1763215325	12.4 V	11.1 V	-3.6 C	-3.9 C	50 C
1763214875	12.38 V	11.1 V	-3.7 C	-3.9 C	50 C
1763214425	12.38 V	11.1 V	-3.7 C	-3.9 C	50 C
1763213976	12.39 V	11.1 V	-3.7 C	-3.9 C	50 C
1763213525	12.4 V	11.1 V	-3.7 C	-3.9 C	50 C
1763213075	12.38 V	11.1 V	-3.7 C	-3.9 C	50 C
1763212625	12.38 V	11.1 V	-3.7 C	-3.9 C	50 C
1763212174	12.38 V	11.1 V	-3.7 C	-3.9 C	50 C
1763211725	12.39 V	11.1 V	-3.8 C	-3.9 C	50 C
1763211275	12.38 V	11.1 V	-3.7 C	-3.9 C	50 C
1763210824	12.38 V	11.1 V	-3.8 C	-3.9 C	50 C
1763210374	12.36 V	11.1 V	-3.8 C	-3.9 C	50 C
1763209925	12.36 V	11.1 V	-3.8 C	-3.9 C	50 C
1763209474	12.35 V	11.1 V	-3.8 C	-3.9 C	50 C
1763209024	12.35 V	11.1 V	-3.8 C	-3.9 C	50 C
1763208575	12.34 V	11.1 V	-3.8 C	-3.9 C	50 C
1763208125	12.34 V	11.1 V	-3.8 C	-3.9 C	50 C
1763207674	12.34 V	11.1 V	-3.8 C	-3.9 C	50 C
1763207225	12.34 V	11.1 V	-3.8 C	-3.9 C	50 C
1763206775	12.34 V	11.1 V	-3.8 C	-3.9 C	50 C
1763206324	12.36 V	11.1 V	-3.8 C	-3.9 C	50 C
1763205874	12.35 V	11.1 V	-3.8 C	-3.9 C	50 C

*Used Equation Coefficients:

Battery: 0, 0.01, 0

LiPo: 0, 0.01, 0

IndoorTemp: 0, 0.01, -50

FreezerTemp: 0, 0.01, -50

BatteryTemp: 0, 0.1, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)