This is the latest recevied telemetry packets stored in our database for station/object VE3STP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Shack Temp* | CPU Temp* | CPU Usage* | Fan Speed* |
|---|---|---|---|---|---|
| 1836274429 | 13.2 V | 19.2 C | 40.5 C | 3 % | 0 % |
| 1762287882 | 13.3 V | 16.4 C | 37.5 C | 1 % | 0 % |
| 1762286081 | 13.3 V | 16.4 C | 37.2 C | 1 % | 0 % |
| 1762284282 | 13.1 V | 16.2 C | 37.1 C | 1 % | 0 % |
| 1762282481 | 13.3 V | 15.8 C | 36.8 C | 1 % | 0 % |
| 1762280687 | 13.3 V | 15.3 C | 36.6 C | 1 % | 0 % |
| 1762278880 | 13.3 V | 14.6 C | 35.8 C | 1 % | 0 % |
| 1762277080 | 13.3 V | 13.8 C | 35 C | 1 % | 0 % |
| 1762275280 | 13.3 V | 13.1 C | 34.2 C | 1 % | 0 % |
| 1762273479 | 13.3 V | 12.5 C | 34.2 C | 1 % | 0 % |
| 1762271680 | 13.3 V | 12 C | 33.3 C | 1 % | 0 % |
| 1762269880 | 13.3 V | 11.6 C | 32.8 C | 1 % | 0 % |
| 1762268080 | 13.3 V | 11.2 C | 32.3 C | 1 % | 0 % |
| 1762266280 | 13.3 V | 10.9 C | 32.1 C | 1 % | 0 % |
| 1762264478 | 13.3 V | 10.8 C | 32.1 C | 1 % | 0 % |
| 1762262678 | 13.3 V | 10.8 C | 31.9 C | 1 % | 0 % |
| 1762260878 | 13.3 V | 10.8 C | 31.8 C | 2 % | 0 % |
| 1762259078 | 13.3 V | 10.9 C | 32.1 C | 1 % | 0 % |
| 1762257278 | 13.3 V | 11 C | 31.7 C | 1 % | 0 % |
| 1762255477 | 13.3 V | 11.2 C | 31.9 C | 1 % | 0 % |
| 1762253678 | 13.3 V | 11.3 C | 32.3 C | 1 % | 0 % |
| 1762251877 | 13.3 V | 11.4 C | 32.3 C | 1 % | 0 % |
| 1762250077 | 13.3 V | 11.6 C | 32.4 C | 3 % | 0 % |
| 1762248276 | 13.3 V | 11.8 C | 32.6 C | 2 % | 0 % |
| 1762246477 | 13.2 V | 11.9 C | 32.6 C | 1 % | 0 % |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
Shack Temp: 0, 0.1, 0
CPU Temp: 0, 0.1, 0
CPU Usage: 0, 1, 0
Fan Speed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)