APRS Track Direct

My position About ☰

reset

AI5TX-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AI5TX-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753038578	12.6 Volt	60 Pkt	20 Pkt	31 Pcnt
1753034981	12.6 Volt	80 Pkt	30 Pkt	34 Pcnt
1753034978	12.6 Volt	80 Pkt	30 Pkt	34 Pcnt
1753031378	12.6 Volt	70 Pkt	20 Pkt	33 Pcnt
1753027778	12.6 Volt	120 Pkt	50 Pkt	39 Pcnt
1753024178	12.6 Volt	290 Pkt	90 Pkt	44 Pcnt
1753020584	12.6 Volt	580 Pkt	140 Pkt	57 Pcnt
1753020578	12.6 Volt	580 Pkt	140 Pkt	57 Pcnt
1753016978	12.6 Volt	360 Pkt	100 Pkt	50 Pcnt
1753013378	12.6 Volt	120 Pkt	50 Pkt	34 Pcnt
1753009778	12.6 Volt	120 Pkt	40 Pkt	47 Pcnt
1753006179	12.6 Volt	90 Pkt	30 Pkt	39 Pcnt
1753002579	12.6 Volt	80 Pkt	20 Pkt	36 Pcnt
1752998979	12.6 Volt	80 Pkt	20 Pkt	38 Pcnt
1752995379	12.6 Volt	50 Pkt	10 Pkt	30 Pcnt
1752991779	12.6 Volt	40 Pkt	10 Pkt	28 Pcnt
1752988179	12.6 Volt	30 Pkt	10 Pkt	26 Pcnt
1752984579	12.6 Volt	50 Pkt	20 Pkt	32 Pcnt
1752980979	12.6 Volt	50 Pkt	30 Pkt	31 Pcnt
1752977379	12.6 Volt	50 Pkt	30 Pkt	34 Pcnt
1752973779	12.6 Volt	50 Pkt	30 Pkt	32 Pcnt
1752970179	12.6 Volt	50 Pkt	30 Pkt	29 Pcnt
1752966579	12.6 Volt	70 Pkt	50 Pkt	39 Pcnt
1752962980	12.6 Volt	120 Pkt	20 Pkt	45 Pcnt
1752959380	12.6 Volt	100 Pkt	10 Pkt	41 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)