This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792140591 | 4.19 VDC | 11.9 C | 8221 | 0 | 0 |
| 1792139688 | 4.19 VDC | 12 C | 8234 | 0 | 0 |
| 1792139638 | 4.19 VDC | 12 C | 8233 | 0 | 0 |
| 1792139615 | 4.19 VDC | 12 C | 8222 | 0 | 0 |
| 1792138757 | 4.19 VDC | 12.4 C | 8089 | 0 | 0 |
| 1792138653 | 4.19 VDC | 12.5 C | 8103 | 0 | 0 |
| 1792138578 | 4.19 VDC | 12.5 C | 8068 | 0 | 0 |
| 1792138398 | 4.19 VDC | 12.7 C | 8083 | 0 | 0 |
| 1792137495 | 4.19 VDC | 13.6 C | 8195 | 0 | 0 |
| 1792136592 | 4.19 VDC | 14.4 C | 8202 | 0 | 0 |
| 1792135689 | 4.19 VDC | 13.4 C | 8205 | 0 | 0 |
| 1792133883 | 4.19 VDC | 8.2 C | 8212 | 0 | 0 |
| 1792132980 | 4.19 VDC | 8 C | 8179 | 0 | 0 |
| 1792132077 | 4.19 VDC | 7.9 C | 8239 | 0 | 0 |
| 1792131174 | 4.19 VDC | 8 C | 8181 | 0 | 0 |
| 1792131132 | 4.19 VDC | 8 C | 8151 | 0 | 0 |
| 1792131111 | 4.19 VDC | 8 C | 8151 | 0 | 0 |
| 1792130367 | 4.19 VDC | 8.1 C | 8221 | 0 | 0 |
| 1792129464 | 4.19 VDC | 8.3 C | 8215 | 0 | 0 |
| 1792129350 | 4.19 VDC | 8.3 C | 8263 | 0 | 0 |
| 1792128447 | 4.19 VDC | 8.5 C | 8211 | 0 | 0 |
| 1792128402 | 4.19 VDC | 8.6 C | 8202 | 0 | 0 |
| 1792128333 | 4.19 VDC | 8.6 C | 8220 | 0 | 0 |
| 1792128318 | 4.19 VDC | 8.6 C | 8220 | 0 | 0 |
| 1792128281 | 4.19 VDC | 8.6 C | 8218 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)