APRS Track Direct

My position About ☰

reset

TA1F-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1F-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1758213601	25 Pkt	22 Pkt	9 Pkt	-38 dBm	0.55 V
1758213237	12 Pkt	32 Pkt	10 Pkt	-41 dBm	0.45 V
1758212872	17 Pkt	19 Pkt	15 Pkt	-36 dBm	0.49 V
1758212507	24 Pkt	14 Pkt	10 Pkt	-37 dBm	0.49 V
1758212143	19 Pkt	21 Pkt	13 Pkt	-44 dBm	0.51 V
1758211778	25 Pkt	8 Pkt	15 Pkt	-37 dBm	0.55 V
1758211414	27 Pkt	15 Pkt	5 Pkt	-43 dBm	0.51 V
1758211050	17 Pkt	20 Pkt	19 Pkt	-37 dBm	0.51 V
1758210685	17 Pkt	18 Pkt	6 Pkt	-40 dBm	0.51 V
1758210320	16 Pkt	32 Pkt	8 Pkt	-38 dBm	0.74 V
1758209955	26 Pkt	9 Pkt	16 Pkt	-37 dBm	0.57 V
1758209590	25 Pkt	8 Pkt	11 Pkt	-44 dBm	0.45 V
1758209226	17 Pkt	10 Pkt	14 Pkt	-42 dBm	0.98 V
1758208861	19 Pkt	15 Pkt	9 Pkt	-37 dBm	0.53 V
1758208497	3 Pkt	0 Pkt	6 Pkt	-37 dBm	0.57 V
1758207988	24 Pkt	21 Pkt	7 Pkt	-38 dBm	0.43 V
1758207623	22 Pkt	9 Pkt	10 Pkt	-36 dBm	0.51 V
1758207259	15 Pkt	9 Pkt	11 Pkt	-42 dBm	0.59 V
1758206894	5 Pkt	2 Pkt	4 Pkt	-37 dBm	0.43 V
1758206698	21 Pkt	16 Pkt	14 Pkt	-38 dBm	0.55 V
1758206334	25 Pkt	13 Pkt	11 Pkt	-37 dBm	0.45 V
1758205969	18 Pkt	11 Pkt	4 Pkt	-37 dBm	0.51 V
1758205604	14 Pkt	16 Pkt	14 Pkt	-36 dBm	0.43 V
1758205240	3 Pkt	3 Pkt	2 Pkt	-37 dBm	0.49 V
1758205051	20 Pkt	14 Pkt	9 Pkt	-39 dBm	0.53 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)