APRS Track Direct

My position About ☰

reset

IS0AML Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0AML. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1836274433	0 Rx Erlang	0.08 Tx Erlang	0 count/10m	1 count/10m	53 count/10m
1836273983	0 Rx Erlang	0.08 Tx Erlang	0 count/10m	0 count/10m	54 count/10m
1762368431	0 Rx Erlang	0.06 Tx Erlang	0 count/10m	0 count/10m	39 count/10m
1762367231	0 Rx Erlang	0.07 Tx Erlang	0 count/10m	0 count/10m	53 count/10m
1762366031	0 Rx Erlang	0.06 Tx Erlang	0 count/10m	0 count/10m	44 count/10m
1762364831	0 Rx Erlang	0.05 Tx Erlang	0 count/10m	0 count/10m	38 count/10m
1762363631	0 Rx Erlang	0.06 Tx Erlang	0 count/10m	1 count/10m	41 count/10m
1762362431	0 Rx Erlang	0.09 Tx Erlang	0 count/10m	0 count/10m	56 count/10m
1762361231	0 Rx Erlang	0.05 Tx Erlang	0 count/10m	0 count/10m	34 count/10m
1762360031	0 Rx Erlang	0.05 Tx Erlang	0 count/10m	0 count/10m	33 count/10m
1762358831	0 Rx Erlang	0.05 Tx Erlang	0 count/10m	0 count/10m	36 count/10m
1762357631	0.01 Rx Erlang	0.05 Tx Erlang	2 count/10m	2 count/10m	40 count/10m
1762356431	0.01 Rx Erlang	0.05 Tx Erlang	8 count/10m	5 count/10m	30 count/10m
1762355231	0.01 Rx Erlang	0.04 Tx Erlang	5 count/10m	4 count/10m	31 count/10m
1762354031	0.01 Rx Erlang	0.05 Tx Erlang	9 count/10m	8 count/10m	35 count/10m
1762352831	0.03 Rx Erlang	0.04 Tx Erlang	21 count/10m	18 count/10m	31 count/10m
1762351631	0.04 Rx Erlang	0.05 Tx Erlang	25 count/10m	22 count/10m	35 count/10m
1762350430	0.04 Rx Erlang	0.05 Tx Erlang	25 count/10m	23 count/10m	33 count/10m
1762349231	0.03 Rx Erlang	0.04 Tx Erlang	20 count/10m	17 count/10m	32 count/10m
1762348031	0.04 Rx Erlang	0.06 Tx Erlang	29 count/10m	29 count/10m	43 count/10m
1762346830	0.07 Rx Erlang	0.1 Tx Erlang	52 count/10m	50 count/10m	70 count/10m
1762345631	0.07 Rx Erlang	0.09 Tx Erlang	39 count/10m	38 count/10m	56 count/10m
1762344438	0.07 Rx Erlang	0.09 Tx Erlang	43 count/10m	40 count/10m	58 count/10m
1762343231	0.08 Rx Erlang	0.09 Tx Erlang	49 count/10m	46 count/10m	58 count/10m
1762342031	0.07 Rx Erlang	0.08 Tx Erlang	44 count/10m	42 count/10m	58 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)