This is the latest recevied telemetry packets stored in our database for station/object BV6JR-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPUTemp* | RxPkts/20m* | RxPkts/1h* | RxPkts/24h* | DiGi* |
|---|---|---|---|---|---|
| 1794917857 | 22 C | 42 p | 97 p | 1632 p | 0 p |
| 1794916657 | 21.9 C | 38 p | 135 p | 1606 p | 0 p |
| 1794915457 | 21.8 C | 17 p | 137 p | 1581 p | 0 p |
| 1794914258 | 22 C | 80 p | 139 p | 1578 p | 0 p |
| 1794913058 | 21.8 C | 40 p | 78 p | 1517 p | 0 p |
| 1794911858 | 21.8 C | 19 p | 59 p | 1504 p | 0 p |
| 1794910658 | 22.2 C | 19 p | 59 p | 1520 p | 0 p |
| 1794909457 | 22.3 C | 21 p | 79 p | 1537 p | 0 p |
| 1794908257 | 21.9 C | 19 p | 77 p | 1530 p | 0 p |
| 1794907057 | 21.9 C | 39 p | 78 p | 1533 p | 0 p |
| 1794905857 | 21.7 C | 19 p | 58 p | 1520 p | 0 p |
| 1794904657 | 21.8 C | 20 p | 58 p | 1521 p | 0 p |
| 1794903457 | 22 C | 19 p | 64 p | 1536 p | 0 p |
| 1794902257 | 21.9 C | 19 p | 95 p | 1559 p | 0 p |
| 1794901057 | 22 C | 26 p | 115 p | 1555 p | 0 p |
| 1794899857 | 22.5 C | 50 p | 137 p | 1553 p | 0 p |
| 1794898657 | 22.3 C | 39 p | 144 p | 1514 p | 0 p |
*Used Equation Coefficients:
CPUTemp: 0, 1, 0
RxPkts/20m: 0, 1, 0
RxPkts/1h: 0, 1, 0
RxPkts/24h: 0, 1, 0
DiGi: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)