This is the latest recevied telemetry packets stored in our database for station/object MB7UHT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp_Int* | Temp_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732273075 | 5.8 deg.C | 6 deg.C | 0 | 0 | 0 |
| 1732271875 | 5.6 deg.C | 5.7 deg.C | 0 | 0 | 0 |
| 1732270674 | 5.8 deg.C | 5.6 deg.C | 0 | 0 | 0 |
| 1732267075 | 4.7 deg.C | 5.2 deg.C | 0 | 0 | 0 |
| 1732265875 | 3.8 deg.C | 4.4 deg.C | 0 | 0 | 0 |
| 1732264674 | 2.6 deg.C | 3.6 deg.C | 0 | 0 | 0 |
| 1732263475 | 1.6 deg.C | 2 deg.C | 0 | 0 | 0 |
| 1732262274 | 1.4 deg.C | 1.5 deg.C | 0 | 0 | 0 |
| 1732261075 | 1.4 deg.C | 1.4 deg.C | 0 | 0 | 0 |
| 1732259875 | 1.4 deg.C | 1.4 deg.C | 0 | 0 | 0 |
| 1732258675 | 1.4 deg.C | 1.4 deg.C | 0 | 0 | 0 |
| 1732257475 | 1.4 deg.C | 1.4 deg.C | 0 | 0 | 0 |
| 1732256275 | 1.4 deg.C | 1.3 deg.C | 0 | 0 | 0 |
| 1732255075 | 1.4 deg.C | 1.4 deg.C | 0 | 0 | 0 |
| 1732253875 | 1.3 deg.C | 1.4 deg.C | 0 | 0 | 0 |
| 1732252675 | 1.1 deg.C | 1.3 deg.C | 0 | 0 | 0 |
| 1732251475 | 1.3 deg.C | 1.3 deg.C | 0 | 0 | 0 |
| 1732250274 | 1.3 deg.C | 1.3 deg.C | 0 | 0 | 0 |
| 1732249075 | 1.4 deg.C | 1.3 deg.C | 0 | 0 | 0 |
| 1732247875 | 1.5 deg.C | 1.4 deg.C | 0 | 0 | 0 |
| 1732246675 | 1.4 deg.C | 1.5 deg.C | 0 | 0 | 0 |
| 1732245475 | 1.6 deg.C | 1.5 deg.C | 0 | 0 | 0 |
| 1732244274 | 1.9 deg.C | 1.8 deg.C | 0 | 0 | 0 |
| 1732243075 | 1.8 deg.C | 1.8 deg.C | 0 | 0 | 0 |
| 1732241875 | 1.9 deg.C | 1.8 deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp_Int: 0, 0.1, 0
Temp_Ext: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)