This is the latest recevied telemetry packets stored in our database for station/object DF3OT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749329378 | 16.6 deg C | 72 % | 1010.5 hPa | 0 | 0 |
| 1749328478 | 16.6 deg C | 72.2 % | 1010.3 hPa | 0 | 0 |
| 1749327578 | 16.6 deg C | 72.3 % | 1008.6 hPa | 0 | 0 |
| 1749326677 | 16.8 deg C | 72.4 % | 1010.9 hPa | 0 | 0 |
| 1749325777 | 17 deg C | 72.3 % | 1009.6 hPa | 0 | 0 |
| 1749324877 | 17.1 deg C | 72.1 % | 1009.3 hPa | 0 | 0 |
| 1749323977 | 17.3 deg C | 72.3 % | 1011 hPa | 0 | 0 |
| 1749323077 | 17.4 deg C | 73.2 % | 1009 hPa | 0 | 0 |
| 1749322177 | 17.4 deg C | 74.3 % | 1009.3 hPa | 0 | 0 |
| 1749321277 | 17 deg C | 78.6 % | 1009.4 hPa | 0 | 0 |
| 1749320944 | 16.4 deg C | 81.7 % | 1007.8 hPa | 0 | 0 |
| 1749320044 | 16.4 deg C | 81 % | 1008.9 hPa | 0 | 0 |
| 1749319144 | 16.9 deg C | 76.5 % | 1009.8 hPa | 0 | 0 |
| 1749318244 | 18 deg C | 74.7 % | 1009.6 hPa | 0 | 0 |
| 1749317344 | 18.8 deg C | 72.2 % | 1009 hPa | 0 | 0 |
| 1749316443 | 17.9 deg C | 69 % | 1009.8 hPa | 0 | 0 |
| 1749315543 | 19.5 deg C | 62.8 % | 1009.4 hPa | 0 | 0 |
| 1749314643 | 20.1 deg C | 59.4 % | 1006.9 hPa | 0 | 0 |
| 1749313743 | 20.8 deg C | 57.3 % | 1007.1 hPa | 0 | 0 |
| 1749312843 | 20.8 deg C | 58.5 % | 1007.8 hPa | 0 | 0 |
| 1749311943 | 20.6 deg C | 58.7 % | 1007.4 hPa | 0 | 0 |
| 1749311043 | 21.3 deg C | 59.2 % | 1008 hPa | 0 | 0 |
| 1749310143 | 20.6 deg C | 58.3 % | 1008.1 hPa | 0 | 0 |
| 1749309243 | 22 deg C | 55.3 % | 1006 hPa | 0 | 0 |
| 1749308911 | 22 deg C | 55.5 % | 1007.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)