This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274757 | 13 Count | 220 Count | 8 Count | 4.08 VDC | 0 VDC |
| 1766206281 | 190 Count | 802 Count | 103 Count | 4.08 VDC | 0 VDC |
| 1766205383 | 187 Count | 794 Count | 101 Count | 4.08 VDC | 0 VDC |
| 1766204482 | 186 Count | 789 Count | 101 Count | 4.08 VDC | 0 VDC |
| 1766203581 | 183 Count | 782 Count | 99 Count | 4.08 VDC | 0 VDC |
| 1766202682 | 181 Count | 776 Count | 98 Count | 4.08 VDC | 0 VDC |
| 1766201781 | 179 Count | 767 Count | 97 Count | 4.08 VDC | 0 VDC |
| 1766200882 | 177 Count | 757 Count | 96 Count | 4.08 VDC | 0 VDC |
| 1766199984 | 175 Count | 746 Count | 95 Count | 4.08 VDC | 0 VDC |
| 1766199074 | 168 Count | 739 Count | 94 Count | 4.08 VDC | 0 VDC |
| 1766198178 | 165 Count | 728 Count | 92 Count | 4.08 VDC | 0 VDC |
| 1766197274 | 164 Count | 723 Count | 92 Count | 4.08 VDC | 0 VDC |
| 1766196374 | 161 Count | 716 Count | 90 Count | 4.08 VDC | 0 VDC |
| 1766195474 | 160 Count | 713 Count | 90 Count | 4.08 VDC | 0 VDC |
| 1766194575 | 157 Count | 697 Count | 88 Count | 4.08 VDC | 0 VDC |
| 1766193675 | 155 Count | 686 Count | 87 Count | 4.08 VDC | 0 VDC |
| 1766192775 | 153 Count | 681 Count | 86 Count | 4.08 VDC | 0 VDC |
| 1766191875 | 151 Count | 674 Count | 85 Count | 4.08 VDC | 0 VDC |
| 1766190975 | 149 Count | 667 Count | 84 Count | 4.08 VDC | 0 VDC |
| 1766190074 | 147 Count | 660 Count | 83 Count | 4.09 VDC | 0 VDC |
| 1766189175 | 144 Count | 652 Count | 81 Count | 4.09 VDC | 0 VDC |
| 1766188275 | 143 Count | 649 Count | 81 Count | 4.09 VDC | 0 VDC |
| 1766187376 | 140 Count | 639 Count | 79 Count | 4.09 VDC | 0 VDC |
| 1766185576 | 136 Count | 624 Count | 77 Count | 4.09 VDC | 0 VDC |
| 1766184676 | 134 Count | 620 Count | 76 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)