APRS Track Direct

My position About ☰

reset

S55YLI-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S55YLI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274650	12.3 Volt	1330 Pkt	300 Pkt	69 Pcnt
1836274643	12.3 Volt	1330 Pkt	300 Pkt	69 Pcnt
1836274533	12.3 Volt	1370 Pkt	300 Pkt	70 Pcnt
1836274500	12.3 Volt	1370 Pkt	300 Pkt	70 Pcnt
1836274493	12.3 Volt	1370 Pkt	300 Pkt	70 Pcnt
1836274343	12.3 Volt	1320 Pkt	300 Pkt	69 Pcnt
1836274193	12.3 Volt	1330 Pkt	300 Pkt	70 Pcnt
1836274046	12.3 Volt	1360 Pkt	310 Pkt	68 Pcnt
1836274043	12.3 Volt	1360 Pkt	310 Pkt	68 Pcnt
1762326763	12.3 Volt	1410 Pkt	350 Pkt	72 Pcnt
1762326763	12.3 Volt	1410 Pkt	350 Pkt	72 Pcnt
1762326463	12.38 Volt	1410 Pkt	350 Pkt	72 Pcnt
1762326163	12.38 Volt	1400 Pkt	350 Pkt	71 Pcnt
1762326163	12.38 Volt	1400 Pkt	350 Pkt	71 Pcnt
1762325863	12.38 Volt	1400 Pkt	350 Pkt	71 Pcnt
1762325564	12.38 Volt	1370 Pkt	340 Pkt	70 Pcnt
1762325563	12.38 Volt	1370 Pkt	340 Pkt	70 Pcnt
1762325263	12.38 Volt	1400 Pkt	340 Pkt	70 Pcnt
1762324963	12.38 Volt	1390 Pkt	340 Pkt	70 Pcnt
1762324963	12.38 Volt	1390 Pkt	340 Pkt	70 Pcnt
1762324663	12.38 Volt	1410 Pkt	340 Pkt	70 Pcnt
1762324364	12.38 Volt	1410 Pkt	350 Pkt	70 Pcnt
1762324363	12.38 Volt	1410 Pkt	350 Pkt	70 Pcnt
1762324063	12.15 Volt	1420 Pkt	350 Pkt	71 Pcnt
1762323764	12.38 Volt	1430 Pkt	350 Pkt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)