APRS Track Direct

My position About ☰

reset

VK2RAY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RAY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPU Tmp*	Env Tmp*	BattV*	BattI*	Pwr*
1744818780	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818720	40 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818660	40.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818600	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818540	40.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818480	40.5 degC	-0 degC	13.2 V	-2.4 A	-37 W
1744818420	40.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818360	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818300	40 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818240	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818180	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818120	40 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818060	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744818000	40 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817940	40 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817880	40.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817820	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817760	40.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817700	40.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817640	40 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817580	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817520	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817460	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817400	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W
1744817340	39.5 degC	-0 degC	13.2 V	-2.4 A	-33 W

*Used Equation Coefficients:

CPU Tmp: 0, 0.5, 0

Env Tmp: 0, 0.3333, -10

BattV: 0, 0.04, 9

BattI: 0, 0.4, -50

Pwr: 0, 4, -509

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)