This is the latest recevied telemetry packets stored in our database for station/object 9A3PRO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1750146083 | 12.01 Volt | 910 Pkt | 0 Pkt | 75 Pcnt | 0 None |
1750146080 | 12.01 Volt | 910 Pkt | 0 Pkt | 75 Pcnt | 0 None |
1750145179 | 12.01 Volt | 830 Pkt | 0 Pkt | 72 Pcnt | 0 None |
1750144278 | 12.01 Volt | 820 Pkt | 0 Pkt | 71 Pcnt | 0 None |
1750143377 | 12.01 Volt | 790 Pkt | 0 Pkt | 70 Pcnt | 0 None |
1750142477 | 12.01 Volt | 770 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750142476 | 12.01 Volt | 770 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750141575 | 12.01 Volt | 800 Pkt | 0 Pkt | 70 Pcnt | 0 None |
1750140675 | 12.01 Volt | 820 Pkt | 0 Pkt | 71 Pcnt | 0 None |
1750139774 | 12.01 Volt | 830 Pkt | 0 Pkt | 72 Pcnt | 0 None |
1750138875 | 12.01 Volt | 850 Pkt | 0 Pkt | 73 Pcnt | 0 None |
1750138873 | 12.01 Volt | 850 Pkt | 0 Pkt | 73 Pcnt | 0 None |
1750137972 | 12.01 Volt | 860 Pkt | 0 Pkt | 72 Pcnt | 0 None |
1750137071 | 12.01 Volt | 840 Pkt | 0 Pkt | 72 Pcnt | 0 None |
1750136170 | 12.01 Volt | 820 Pkt | 0 Pkt | 70 Pcnt | 0 None |
1750135270 | 12.01 Volt | 810 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750135269 | 12.01 Volt | 810 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750134368 | 12.01 Volt | 840 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750133467 | 12.01 Volt | 830 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750132567 | 12.01 Volt | 830 Pkt | 0 Pkt | 68 Pcnt | 0 None |
1750131820 | 12.01 Volt | 820 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750131666 | 12.01 Volt | 820 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750131666 | 12.01 Volt | 820 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750130765 | 12.01 Volt | 800 Pkt | 0 Pkt | 69 Pcnt | 0 None |
1750129864 | 12.01 Volt | 800 Pkt | 0 Pkt | 68 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)