APRS Track Direct

My position About ☰

reset

SK6LK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK6LK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1753771256	12.38 Volt	0 Pkt	18 Pcnt	19 C
1753770356	12.38 Volt	10 Pkt	21 Pcnt	19 C
1753769456	12.38 Volt	10 Pkt	26 Pcnt	19 C
1753768556	12.38 Volt	10 Pkt	26 Pcnt	19 C
1753767656	12.38 Volt	10 Pkt	26 Pcnt	19 C
1753766756	12.38 Volt	10 Pkt	20 Pcnt	19 C
1753765856	12.38 Volt	0 Pkt	16 Pcnt	19 C
1753764956	12.38 Volt	0 Pkt	14 Pcnt	19 C
1753764056	12.38 Volt	0 Pkt	17 Pcnt	19 C
1753763156	12.38 Volt	0 Pkt	17 Pcnt	19 C
1753762256	12.38 Volt	0 Pkt	19 Pcnt	19 C
1753761356	12.38 Volt	0 Pkt	21 Pcnt	19 C
1753760456	12.38 Volt	0 Pkt	21 Pcnt	19 C
1753759556	12.38 Volt	0 Pkt	22 Pcnt	19 C
1753758656	12.38 Volt	0 Pkt	19 Pcnt	19 C
1753757757	12.38 Volt	0 Pkt	14 Pcnt	19 C
1753756857	12.38 Volt	0 Pkt	16 Pcnt	19 C
1753755957	12.38 Volt	0 Pkt	16 Pcnt	19.5 C
1753755057	12.38 Volt	0 Pkt	16 Pcnt	19.5 C
1753754157	12.38 Volt	10 Pkt	21 Pcnt	19.5 C
1753753257	12.38 Volt	10 Pkt	21 Pcnt	19.5 C
1753752357	12.38 Volt	10 Pkt	22 Pcnt	19.5 C
1753751457	12.38 Volt	0 Pkt	27 Pcnt	19.5 C
1753750557	12.38 Volt	0 Pkt	25 Pcnt	19.5 C
1753749657	12.38 Volt	0 Pkt	25 Pcnt	19.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)