This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-EY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Hmdt* | Baro* | RSSI* | Load* |
|---|---|---|---|---|---|
| 1790663253 | 21 C | 42.4 % | 1024.8 mbar | -60 dBm | 9.6 % |
| 1790662893 | 21 C | 42.4 % | 1024.8 mbar | -60 dBm | 9.6 % |
| 1790662532 | 21 C | 42.4 % | 1024.8 mbar | -60 dBm | 9.6 % |
| 1790662172 | 21 C | 42.4 % | 1024.4 mbar | -60 dBm | 9.2 % |
| 1790661812 | 21 C | 42 % | 1024.4 mbar | -60 dBm | 9.2 % |
| 1790661452 | 21 C | 42.4 % | 1024.4 mbar | -60 dBm | 9.6 % |
| 1790661091 | 21 C | 42.4 % | 1024.4 mbar | -60 dBm | 9.2 % |
| 1790660731 | 21 C | 42 % | 1024.4 mbar | -60 dBm | 10 % |
| 1790660371 | 21 C | 42 % | 1024.4 mbar | -60 dBm | 9.6 % |
| 1790660011 | 21 C | 42 % | 1024.4 mbar | -60 dBm | 10 % |
| 1790659651 | 21 C | 42.4 % | 1024.4 mbar | -60 dBm | 10 % |
| 1790659290 | 21 C | 42.4 % | 1024.4 mbar | -60 dBm | 9.2 % |
| 1790658930 | 21 C | 42 % | 1024 mbar | -60 dBm | 9.2 % |
| 1790658570 | 21 C | 42.4 % | 1024 mbar | -60 dBm | 9.2 % |
| 1790658210 | 21 C | 42 % | 1024 mbar | -60 dBm | 9.2 % |
| 1790657849 | 21 C | 42 % | 1024 mbar | -60 dBm | 9.2 % |
| 1790657489 | 21 C | 42.4 % | 1024 mbar | -59 dBm | 9.6 % |
| 1790657129 | 21 C | 42.4 % | 1024 mbar | -59 dBm | 9.6 % |
| 1790656769 | 21 C | 42 % | 1024 mbar | -60 dBm | 9.6 % |
| 1790656409 | 21 C | 42.4 % | 1024 mbar | -59 dBm | 9.6 % |
| 1790656049 | 21 C | 42.4 % | 1024 mbar | -60 dBm | 9.2 % |
| 1790655688 | 21 C | 42.4 % | 1024 mbar | -60 dBm | 9.2 % |
| 1790655328 | 21 C | 42.4 % | 1024 mbar | -61 dBm | 9.2 % |
| 1790654968 | 21 C | 42 % | 1023.6 mbar | -60 dBm | 9.2 % |
| 1790654608 | 21 C | 42 % | 1023.6 mbar | -60 dBm | 9.6 % |
*Used Equation Coefficients:
Temp: 0, 0.5, -25
Hmdt: 0, 0.4, 0
Baro: 0, 0.4, 950
RSSI: 0, -1, 0
Load: 0, 0.4, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)