This is the latest recevied telemetry packets stored in our database for station/object BEAMONE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778026891 | 11.2 deg C | 73.6 % | 0 | 0 | 0 |
| 1778025990 | 11.3 deg C | 72.8 % | 0 | 0 | 0 |
| 1778025091 | 11.5 deg C | 71.6 % | 0 | 0 | 0 |
| 1778024190 | 11.5 deg C | 70.8 % | 0 | 0 | 0 |
| 1778023290 | 11.7 deg C | 69.7 % | 0 | 0 | 0 |
| 1778022390 | 12 deg C | 69.2 % | 0 | 0 | 0 |
| 1778021490 | 12.2 deg C | 70.8 % | 0 | 0 | 0 |
| 1778020590 | 12.3 deg C | 73.5 % | 0 | 0 | 0 |
| 1778019690 | 12.4 deg C | 77 % | 0 | 0 | 0 |
| 1778018790 | 12.5 deg C | 79.2 % | 0 | 0 | 0 |
| 1778017890 | 12.5 deg C | 77.9 % | 0 | 0 | 0 |
| 1778016990 | 12.5 deg C | 76.2 % | 0 | 0 | 0 |
| 1778016090 | 12.4 deg C | 75.5 % | 0 | 0 | 0 |
| 1778015190 | 12.4 deg C | 75.6 % | 0 | 0 | 0 |
| 1778014289 | 12.5 deg C | 75.4 % | 0 | 0 | 0 |
| 1778013389 | 12.6 deg C | 75.7 % | 0 | 0 | 0 |
| 1778012489 | 12.5 deg C | 76.2 % | 0 | 0 | 0 |
| 1778011589 | 12.5 deg C | 75.6 % | 0 | 0 | 0 |
| 1778010689 | 12.7 deg C | 75.3 % | 0 | 0 | 0 |
| 1778009789 | 12.5 deg C | 75.7 % | 0 | 0 | 0 |
| 1778008889 | 12.5 deg C | 76.1 % | 0 | 0 | 0 |
| 1778008798 | 12.5 deg C | 76 % | 0 | 0 | 0 |
| 1778007899 | 12.4 deg C | 75.8 % | 0 | 0 | 0 |
| 1778006998 | 12.4 deg C | 75.8 % | 0 | 0 | 0 |
| 1778006098 | 12.6 deg C | 74.5 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)