This is the latest recevied telemetry packets stored in our database for station/object HS8AS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT * | CPU* | Value5* |
|---|---|---|---|---|---|
| 1792160821 | 27.7 °C | 85.4 %RH | 4.01 V | 33.29 °C | 0 |
| 1792160221 | 27.8 °C | 85.1 %RH | 4 V | 33.29 °C | 0 |
| 1792159621 | 27.58 °C | 86 %RH | 4 V | 33.29 °C | 0 |
| 1792159021 | 27.49 °C | 86.2 %RH | 4 V | 33.29 °C | 0 |
| 1792158421 | 27.58 °C | 85.5 %RH | 4 V | 33.29 °C | 0 |
| 1792157821 | 27.88 °C | 84.3 %RH | 4 V | 33.29 °C | 0 |
| 1792157221 | 28.01 °C | 82.9 %RH | 4.01 V | 33.29 °C | 0 |
| 1792156621 | 28.33 °C | 80.9 %RH | 4 V | 34.29 °C | 0 |
| 1792155421 | 28.11 °C | 81.6 %RH | 4.01 V | 34.29 °C | 0 |
| 1792155397 | 28.12 °C | 81.4 %RH | 4 V | 33.29 °C | 0 |
| 1792154797 | 28.15 °C | 79.8 %RH | 4.01 V | 34.29 °C | 0 |
| 1792154197 | 28.21 °C | 79.1 %RH | 4.01 V | 34.29 °C | 0 |
| 1792153597 | 28.36 °C | 77.7 %RH | 4.01 V | 34.29 °C | 0 |
| 1792152997 | 28.43 °C | 77 %RH | 4 V | 34.29 °C | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT : 0, 0.01, 0
CPU: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)