This is the latest recevied telemetry packets stored in our database for station/object KN6PHW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750185517 | 405 | 641 | 0 | 0 | 0 |
| 1750185278 | 405 | 640 | 0 | 0 | 0 |
| 1750185158 | 405 | 641 | 0 | 0 | 0 |
| 1750184440 | 405 | 639 | 0 | 0 | 0 |
| 1750184201 | 405 | 638 | 0 | 0 | 0 |
| 1750184081 | 405 | 637 | 0 | 0 | 0 |
| 1750183962 | 406 | 637 | 0 | 0 | 0 |
| 1750183603 | 405 | 636 | 0 | 0 | 0 |
| 1750183483 | 406 | 636 | 0 | 0 | 0 |
| 1750183244 | 406 | 635 | 0 | 0 | 0 |
| 1750181808 | 406 | 630 | 0 | 0 | 0 |
| 1750181689 | 406 | 630 | 0 | 0 | 0 |
| 1750181569 | 406 | 630 | 0 | 0 | 0 |
| 1750181450 | 406 | 629 | 0 | 0 | 0 |
| 1750179656 | 407 | 623 | 0 | 0 | 0 |
| 1750179537 | 407 | 622 | 0 | 0 | 0 |
| 1750177147 | 408 | 614 | 0 | 0 | 0 |
| 1750175237 | 409 | 607 | 0 | 0 | 0 |
| 1750174281 | 409 | 604 | 0 | 0 | 0 |
| 1750174162 | 409 | 604 | 0 | 0 | 0 |
| 1750173923 | 408 | 603 | 0 | 0 | 0 |
| 1750173684 | 409 | 603 | 0 | 0 | 0 |
| 1750173565 | 409 | 603 | 0 | 0 | 0 |
| 1750173446 | 405 | 602 | 0 | 0 | 0 |
| 1750173326 | 411 | 602 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)