APRS Track Direct

My position About ☰

reset

YH0DVR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1751258070	24 Pkt	0 Pkt	31 dBm	13.86 V
1751257301	33 Pkt	1 Pkt	31 dBm	13.88 V
1751256928	24 Pkt	0 Pkt	31 dBm	13.88 V
1751256180	27 Pkt	0 Pkt	31 dBm	13.86 V
1751255806	25 Pkt	0 Pkt	31 dBm	13.86 V
1751255433	29 Pkt	0 Pkt	31 dBm	13.86 V
1751255059	37 Pkt	0 Pkt	31 dBm	13.56 V
1751254288	24 Pkt	0 Pkt	31 dBm	13.86 V
1751253914	24 Pkt	0 Pkt	31 dBm	13.86 V
1751253541	30 Pkt	1 Pkt	31 dBm	13.88 V
1751253168	32 Pkt	0 Pkt	31 dBm	13.86 V
1751252794	23 Pkt	0 Pkt	31 dBm	13.86 V
1751252421	20 Pkt	1 Pkt	31 dBm	13.86 V
1751252047	30 Pkt	2 Pkt	31 dBm	13.86 V
1751251279	22 Pkt	0 Pkt	31 dBm	13.49 V
1751250906	29 Pkt	0 Pkt	31 dBm	13.86 V
1751250531	21 Pkt	0 Pkt	31 dBm	13.86 V
1751250158	20 Pkt	0 Pkt	31 dBm	13.86 V
1751249785	26 Pkt	0 Pkt	31 dBm	13.86 V
1751249411	23 Pkt	1 Pkt	31 dBm	13.86 V
1751249038	24 Pkt	0 Pkt	31 dBm	13.86 V
1751248269	24 Pkt	0 Pkt	31 dBm	13.86 V
1751247522	26 Pkt	0 Pkt	31 dBm	13.88 V
1751247147	39 Pkt	0 Pkt	31 dBm	13.56 V
1751246772	24 Pkt	0 Pkt	31 dBm	13.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)