This is the latest recevied telemetry packets stored in our database for station/object K4NE-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274547 | 485 | 625 | 0 | 0 | 0 |
| 1762331607 | 481 | 613 | 0 | 0 | 0 |
| 1762328917 | 482 | 613 | 0 | 0 | 0 |
| 1762326227 | 483 | 614 | 0 | 0 | 0 |
| 1762323536 | 482 | 614 | 0 | 0 | 0 |
| 1762320846 | 482 | 614 | 0 | 0 | 0 |
| 1762318155 | 483 | 614 | 0 | 0 | 0 |
| 1762315465 | 482 | 614 | 0 | 0 | 0 |
| 1762312774 | 483 | 615 | 0 | 0 | 0 |
| 1762310084 | 483 | 615 | 0 | 0 | 0 |
| 1762307393 | 483 | 615 | 0 | 0 | 0 |
| 1762304702 | 482 | 616 | 0 | 0 | 0 |
| 1762302012 | 482 | 618 | 0 | 0 | 0 |
| 1762299321 | 483 | 617 | 0 | 0 | 0 |
| 1762296629 | 483 | 618 | 0 | 0 | 0 |
| 1762291248 | 483 | 618 | 0 | 0 | 0 |
| 1762288558 | 484 | 618 | 0 | 0 | 0 |
| 1762285867 | 484 | 619 | 0 | 0 | 0 |
| 1762280485 | 484 | 622 | 0 | 0 | 0 |
| 1762277793 | 484 | 622 | 0 | 0 | 0 |
| 1762275101 | 484 | 622 | 0 | 0 | 0 |
| 1762272410 | 484 | 620 | 0 | 0 | 0 |
| 1762269719 | 482 | 616 | 0 | 0 | 0 |
| 1762267029 | 483 | 615 | 0 | 0 | 0 |
| 1762264338 | 482 | 614 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)