This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794912709 | 140 Count | 973 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794910908 | 136 Count | 945 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794909108 | 132 Count | 920 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794907307 | 127 Count | 894 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794905506 | 123 Count | 874 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794903705 | 119 Count | 852 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794901905 | 115 Count | 830 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794900104 | 111 Count | 805 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794898303 | 107 Count | 765 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794896502 | 103 Count | 719 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794894702 | 100 Count | 673 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794892901 | 96 Count | 650 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794891100 | 92 Count | 625 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794889299 | 88 Count | 601 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794887499 | 84 Count | 576 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794885698 | 80 Count | 553 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794883897 | 76 Count | 524 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794882097 | 72 Count | 481 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794880296 | 68 Count | 446 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794878495 | 62 Count | 379 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794876694 | 58 Count | 339 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1794874894 | 54 Count | 316 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794871308 | 42 Count | 255 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794869507 | 38 Count | 227 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1794867706 | 34 Count | 204 Count | 0 Count | 3.99 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)