This is the latest recevied telemetry packets stored in our database for station/object VU3BOP-WX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Speed* | Heap* | UpHr* | OK* | Sats* |
|---|---|---|---|---|---|
| 1794916341 | 0 km/h | 19 KB | 10 hr | 66 cnt | 9 sat |
| 1794915141 | 0 km/h | 18 KB | 10 hr | 64 cnt | 8 sat |
| 1794913941 | 0 km/h | 19 KB | 10 hr | 62 cnt | 9 sat |
| 1794912741 | 0 km/h | 19 KB | 9 hr | 60 cnt | 9 sat |
| 1794911541 | 0 km/h | 19 KB | 9 hr | 58 cnt | 8 sat |
| 1794910341 | 0 km/h | 17 KB | 9 hr | 56 cnt | 9 sat |
| 1794909143 | 0 km/h | 17 KB | 8 hr | 54 cnt | 8 sat |
| 1794906741 | 0 km/h | 19 KB | 8 hr | 50 cnt | 8 sat |
| 1794905541 | 0 km/h | 19 KB | 7 hr | 48 cnt | 8 sat |
| 1794904340 | 0 km/h | 19 KB | 7 hr | 46 cnt | 7 sat |
| 1794903140 | 0 km/h | 19 KB | 7 hr | 44 cnt | 7 sat |
| 1794901940 | 0 km/h | 19 KB | 6 hr | 42 cnt | 9 sat |
| 1794900740 | 0 km/h | 19 KB | 6 hr | 40 cnt | 7 sat |
| 1794899540 | 0 km/h | 19 KB | 6 hr | 38 cnt | 10 sat |
| 1794898340 | 0 km/h | 19 KB | 5 hr | 36 cnt | 8 sat |
| 1794897140 | 0 km/h | 19 KB | 5 hr | 34 cnt | 8 sat |
| 1794895940 | 0 km/h | 19 KB | 5 hr | 32 cnt | 7 sat |
| 1794894740 | 0 km/h | 19 KB | 4 hr | 30 cnt | 7 sat |
| 1794893635 | 0 km/h | 19 KB | 4 hr | 28 cnt | 7 sat |
| 1794892435 | 0 km/h | 19 KB | 4 hr | 26 cnt | 7 sat |
| 1794891235 | 0 km/h | 19 KB | 4 hr | 24 cnt | 8 sat |
| 1794890034 | 0 km/h | 19 KB | 3 hr | 22 cnt | 8 sat |
| 1794888834 | 0 km/h | 19 KB | 3 hr | 20 cnt | 7 sat |
| 1794887634 | 0 km/h | 19 KB | 3 hr | 18 cnt | 7 sat |
| 1794886434 | 0 km/h | 19 KB | 2 hr | 16 cnt | 7 sat |
*Used Equation Coefficients:
Speed: 0, 1, 0
Heap: 0, 1, 0
UpHr: 0, 1, 0
OK: 0, 1, 0
Sats: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)