APRS Track Direct

My position About ☰

reset

OE8LCK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE8LCK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732289662	11.25 Volt	370 Pkt	150 Pkt	76 Pcnt
1732289661	11.25 Volt	370 Pkt	150 Pkt	76 Pcnt
1732289361	11.25 Volt	360 Pkt	150 Pkt	74 Pcnt
1732289062	11.25 Volt	350 Pkt	150 Pkt	72 Pcnt
1732289061	11.25 Volt	350 Pkt	150 Pkt	72 Pcnt
1732288761	11.25 Volt	330 Pkt	140 Pkt	71 Pcnt
1732288462	11.25 Volt	320 Pkt	140 Pkt	70 Pcnt
1732288461	11.25 Volt	320 Pkt	140 Pkt	70 Pcnt
1732288161	11.25 Volt	320 Pkt	130 Pkt	68 Pcnt
1732287863	11.25 Volt	310 Pkt	130 Pkt	66 Pcnt
1732287861	11.25 Volt	310 Pkt	130 Pkt	66 Pcnt
1732287561	11.25 Volt	310 Pkt	130 Pkt	64 Pcnt
1732287262	11.25 Volt	300 Pkt	130 Pkt	64 Pcnt
1732287261	11.25 Volt	300 Pkt	130 Pkt	64 Pcnt
1732286961	11.25 Volt	300 Pkt	130 Pkt	64 Pcnt
1732286662	11.25 Volt	290 Pkt	130 Pkt	64 Pcnt
1732286661	11.25 Volt	290 Pkt	130 Pkt	64 Pcnt
1732286361	11.25 Volt	290 Pkt	130 Pkt	63 Pcnt
1732286063	11.25 Volt	280 Pkt	130 Pkt	63 Pcnt
1732286061	11.25 Volt	280 Pkt	130 Pkt	63 Pcnt
1732285761	11.25 Volt	270 Pkt	130 Pkt	63 Pcnt
1732285462	11.25 Volt	260 Pkt	120 Pkt	64 Pcnt
1732285461	11.25 Volt	260 Pkt	120 Pkt	64 Pcnt
1732285161	11.25 Volt	270 Pkt	130 Pkt	65 Pcnt
1732284862	11.25 Volt	260 Pkt	120 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)