This is the latest recevied telemetry packets stored in our database for station/object IV3SRD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1745066576 | 11.93 Volt | 40 Pkt | 40 Pkt | 44 Pcnt | 0 None |
| 1745066275 | 11.93 Volt | 50 Pkt | 40 Pkt | 45 Pcnt | 0 None |
| 1745065975 | 11.93 Volt | 50 Pkt | 40 Pkt | 45 Pcnt | 0 None |
| 1745065675 | 11.93 Volt | 50 Pkt | 40 Pkt | 45 Pcnt | 0 None |
| 1745065375 | 11.93 Volt | 60 Pkt | 40 Pkt | 45 Pcnt | 0 None |
| 1745065074 | 11.93 Volt | 80 Pkt | 40 Pkt | 45 Pcnt | 0 None |
| 1745064774 | 11.93 Volt | 140 Pkt | 50 Pkt | 45 Pcnt | 0 None |
| 1745064474 | 11.93 Volt | 140 Pkt | 40 Pkt | 45 Pcnt | 0 None |
| 1745064173 | 11.93 Volt | 70 Pkt | 40 Pkt | 44 Pcnt | 0 None |
| 1745063873 | 11.93 Volt | 70 Pkt | 40 Pkt | 44 Pcnt | 0 None |
| 1745063573 | 11.93 Volt | 90 Pkt | 40 Pkt | 45 Pcnt | 0 None |
| 1745063272 | 11.93 Volt | 70 Pkt | 40 Pkt | 44 Pcnt | 0 None |
| 1745062972 | 11.93 Volt | 50 Pkt | 40 Pkt | 44 Pcnt | 0 None |
| 1745062672 | 11.93 Volt | 50 Pkt | 40 Pkt | 44 Pcnt | 0 None |
| 1745062372 | 11.93 Volt | 50 Pkt | 50 Pkt | 45 Pcnt | 0 None |
| 1745062071 | 11.93 Volt | 60 Pkt | 50 Pkt | 45 Pcnt | 0 None |
| 1745061771 | 11.93 Volt | 100 Pkt | 50 Pkt | 45 Pcnt | 0 None |
| 1745061471 | 11.93 Volt | 100 Pkt | 60 Pkt | 45 Pcnt | 0 None |
| 1745061170 | 11.93 Volt | 90 Pkt | 60 Pkt | 44 Pcnt | 0 None |
| 1745060870 | 11.93 Volt | 80 Pkt | 60 Pkt | 45 Pcnt | 0 None |
| 1745060570 | 11.93 Volt | 50 Pkt | 50 Pkt | 44 Pcnt | 0 None |
| 1745060270 | 11.93 Volt | 40 Pkt | 60 Pkt | 45 Pcnt | 0 None |
| 1745059969 | 11.93 Volt | 100 Pkt | 50 Pkt | 45 Pcnt | 0 None |
| 1745059669 | 11.93 Volt | 140 Pkt | 60 Pkt | 45 Pcnt | 0 None |
| 1745059369 | 11.93 Volt | 110 Pkt | 50 Pkt | 44 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)