APRS Track Direct

My position About ☰

reset

OE5XIM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE5XIM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RX 1h*	RX 10m*	EF 1h*	Total*	DC*
1790649379	850 Pkt	122 Pkt	57 Pcnt	70 Pcnt	13.28 Volt
1790648779	850 Pkt	152 Pkt	57 Pcnt	70 Pcnt	13.43 Volt
1790648179	850 Pkt	152 Pkt	58 Pcnt	70 Pcnt	13.13 Volt
1790647579	810 Pkt	127 Pkt	57 Pcnt	70 Pcnt	13.43 Volt
1790646979	810 Pkt	125 Pkt	57 Pcnt	70 Pcnt	13.28 Volt
1790646379	810 Pkt	108 Pkt	56 Pcnt	70 Pcnt	13.28 Volt
1790645780	810 Pkt	120 Pkt	56 Pcnt	70 Pcnt	13.58 Volt
1790645180	800 Pkt	145 Pkt	57 Pcnt	70 Pcnt	13.35 Volt
1790644579	780 Pkt	128 Pkt	58 Pcnt	70 Pcnt	13.58 Volt
1790643980	760 Pkt	128 Pkt	58 Pcnt	70 Pcnt	13.28 Volt
1790643380	750 Pkt	117 Pkt	59 Pcnt	70 Pcnt	13.35 Volt
1790642780	750 Pkt	111 Pkt	59 Pcnt	70 Pcnt	13.35 Volt
1790642180	750 Pkt	108 Pkt	60 Pcnt	70 Pcnt	13.58 Volt
1790641580	750 Pkt	119 Pkt	59 Pcnt	71 Pcnt	13.35 Volt
1790640980	730 Pkt	112 Pkt	58 Pcnt	71 Pcnt	13.5 Volt
1790640380	740 Pkt	114 Pkt	57 Pcnt	71 Pcnt	13.58 Volt
1790639780	760 Pkt	123 Pkt	56 Pcnt	71 Pcnt	13.35 Volt
1790639180	750 Pkt	115 Pkt	55 Pcnt	71 Pcnt	13.28 Volt
1790638583	750 Pkt	110 Pkt	54 Pcnt	71 Pcnt	13.5 Volt
1790637980	790 Pkt	107 Pkt	57 Pcnt	71 Pcnt	13.2 Volt
1790637380	820 Pkt	126 Pkt	57 Pcnt	71 Pcnt	13.28 Volt
1790636780	850 Pkt	127 Pkt	59 Pcnt	71 Pcnt	13.43 Volt
1790636180	880 Pkt	115 Pkt	61 Pcnt	71 Pcnt	13.28 Volt
1790635580	940 Pkt	114 Pkt	64 Pcnt	71 Pcnt	13.28 Volt
1790634980	980 Pkt	138 Pkt	66 Pcnt	71 Pcnt	13.35 Volt

*Used Equation Coefficients:

RX 1h: 0, 10, 0

RX 10m: 0, 1, 0

EF 1h: 0, 1, 0

Total: 0, 1, 0

DC: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)