This is the latest recevied telemetry packets stored in our database for station/object DG1SGW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766219085 | 28.7 deg C | 30.8 % | 0 | 0 | 0 |
| 1766218185 | 28.6 deg C | 30.7 % | 0 | 0 | 0 |
| 1766217285 | 28.6 deg C | 30.7 % | 0 | 0 | 0 |
| 1766216385 | 28.5 deg C | 30.7 % | 0 | 0 | 0 |
| 1766215485 | 28.4 deg C | 30.9 % | 0 | 0 | 0 |
| 1766214585 | 28.2 deg C | 30.9 % | 0 | 0 | 0 |
| 1766213684 | 28.2 deg C | 30.8 % | 0 | 0 | 0 |
| 1766212784 | 28.2 deg C | 30.9 % | 0 | 0 | 0 |
| 1766211884 | 28 deg C | 31 % | 0 | 0 | 0 |
| 1766211551 | 28 deg C | 31 % | 0 | 0 | 0 |
| 1766210651 | 27.8 deg C | 31.2 % | 0 | 0 | 0 |
| 1766209751 | 27.6 deg C | 31.4 % | 0 | 0 | 0 |
| 1766208851 | 27.4 deg C | 31.6 % | 0 | 0 | 0 |
| 1766207951 | 27.1 deg C | 31.8 % | 0 | 0 | 0 |
| 1766207051 | 26.8 deg C | 32.2 % | 0 | 0 | 0 |
| 1766206151 | 26.3 deg C | 32.5 % | 0 | 0 | 0 |
| 1766205251 | 25.9 deg C | 32.8 % | 0 | 0 | 0 |
| 1766204351 | 25.6 deg C | 32.6 % | 0 | 0 | 0 |
| 1766203451 | 25.6 deg C | 32.4 % | 0 | 0 | 0 |
| 1766202550 | 25.6 deg C | 32.4 % | 0 | 0 | 0 |
| 1766201650 | 25.7 deg C | 32.4 % | 0 | 0 | 0 |
| 1766200750 | 25.8 deg C | 32.4 % | 0 | 0 | 0 |
| 1766199850 | 25.9 deg C | 32.5 % | 0 | 0 | 0 |
| 1766199535 | 25.9 deg C | 32.5 % | 0 | 0 | 0 |
| 1766198635 | 25.9 deg C | 32.5 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)