This is the latest recevied telemetry packets stored in our database for station/object DB0WBD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1754232113 | 14.14 Volt | 400 Pkt | 30 Pkt | 65 Pcnt | 0 None |
| 1754228509 | 14.14 Volt | 370 Pkt | 30 Pkt | 72 Pcnt | 0 None |
| 1754224905 | 14.14 Volt | 390 Pkt | 20 Pkt | 63 Pcnt | 0 None |
| 1754221302 | 14.14 Volt | 400 Pkt | 20 Pkt | 63 Pcnt | 0 None |
| 1754217699 | 14.06 Volt | 450 Pkt | 20 Pkt | 63 Pcnt | 0 None |
| 1754214095 | 14.14 Volt | 600 Pkt | 20 Pkt | 74 Pcnt | 0 None |
| 1754210491 | 14.14 Volt | 540 Pkt | 10 Pkt | 69 Pcnt | 0 None |
| 1754206888 | 14.14 Volt | 480 Pkt | 20 Pkt | 70 Pcnt | 0 None |
| 1754203285 | 13.98 Volt | 440 Pkt | 30 Pkt | 71 Pcnt | 0 None |
| 1754199681 | 14.14 Volt | 390 Pkt | 20 Pkt | 71 Pcnt | 0 None |
| 1754196078 | 14.14 Volt | 370 Pkt | 20 Pkt | 75 Pcnt | 0 None |
| 1754192474 | 14.14 Volt | 330 Pkt | 20 Pkt | 69 Pcnt | 0 None |
| 1754188870 | 14.14 Volt | 310 Pkt | 10 Pkt | 64 Pcnt | 0 None |
| 1754185267 | 14.14 Volt | 330 Pkt | 20 Pkt | 67 Pcnt | 0 None |
| 1754181663 | 14.14 Volt | 290 Pkt | 20 Pkt | 61 Pcnt | 0 None |
| 1754178060 | 14.14 Volt | 300 Pkt | 20 Pkt | 59 Pcnt | 0 None |
| 1754174456 | 13.98 Volt | 330 Pkt | 20 Pkt | 59 Pcnt | 0 None |
| 1754170853 | 14.14 Volt | 460 Pkt | 40 Pkt | 67 Pcnt | 0 None |
| 1754167249 | 14.14 Volt | 440 Pkt | 20 Pkt | 64 Pcnt | 0 None |
| 1754163645 | 14.14 Volt | 370 Pkt | 20 Pkt | 68 Pcnt | 0 None |
| 1754160043 | 14.14 Volt | 410 Pkt | 10 Pkt | 71 Pcnt | 0 None |
| 1754156439 | 14.14 Volt | 420 Pkt | 20 Pkt | 68 Pcnt | 0 None |
| 1754152835 | 14.14 Volt | 500 Pkt | 20 Pkt | 70 Pcnt | 0 None |
| 1754149231 | 14.14 Volt | 540 Pkt | 10 Pkt | 68 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)