APRS Track Direct

My position About ☰

reset

IR2T Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2T. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1732292916	10 Pkt	60 Pkt	6 Pkt	30 Pkt	63 Pcnt
1732292616	10 Pkt	60 Pkt	7 Pkt	40 Pkt	63 Pcnt
1732292315	10 Pkt	70 Pkt	6 Pkt	40 Pkt	65 Pcnt
1732292015	8 Pkt	70 Pkt	5 Pkt	50 Pkt	66 Pcnt
1732291715	9 Pkt	70 Pkt	8 Pkt	50 Pkt	69 Pcnt
1732291415	13 Pkt	80 Pkt	10 Pkt	50 Pkt	76 Pcnt
1732291114	13 Pkt	80 Pkt	6 Pkt	50 Pkt	76 Pcnt
1732290814	7 Pkt	80 Pkt	4 Pkt	50 Pkt	76 Pcnt
1732290514	7 Pkt	80 Pkt	6 Pkt	50 Pkt	77 Pcnt
1732290214	7 Pkt	80 Pkt	6 Pkt	50 Pkt	77 Pcnt
1732289913	10 Pkt	80 Pkt	7 Pkt	50 Pkt	83 Pcnt
1732289613	16 Pkt	90 Pkt	9 Pkt	60 Pkt	85 Pcnt
1732289313	22 Pkt	80 Pkt	12 Pkt	60 Pkt	87 Pcnt
1732289012	25 Pkt	80 Pkt	14 Pkt	50 Pkt	89 Pcnt
1732288712	18 Pkt	80 Pkt	11 Pkt	60 Pkt	92 Pcnt
1732288412	12 Pkt	70 Pkt	9 Pkt	60 Pkt	95 Pcnt
1732288112	14 Pkt	80 Pkt	12 Pkt	60 Pkt	93 Pcnt
1732287811	15 Pkt	80 Pkt	11 Pkt	60 Pkt	91 Pcnt
1732287511	11 Pkt	80 Pkt	6 Pkt	60 Pkt	91 Pcnt
1732287211	9 Pkt	80 Pkt	7 Pkt	60 Pkt	93 Pcnt
1732286910	12 Pkt	80 Pkt	10 Pkt	60 Pkt	91 Pcnt
1732286610	12 Pkt	80 Pkt	10 Pkt	60 Pkt	92 Pcnt
1732286310	9 Pkt	70 Pkt	8 Pkt	60 Pkt	91 Pcnt
1732286010	11 Pkt	70 Pkt	8 Pkt	60 Pkt	91 Pcnt
1732285709	15 Pkt	70 Pkt	12 Pkt	60 Pkt	90 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)